|
|
|
|
#1 |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
![]() |
A stock head gasket is fine for a 2jz-gte. Exceptions might be a very high lift cam (which is excellent for forced induction, by the way), and a custom valve seat job (eg. 7 angle, full radius, etc.).
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
#2 |
|
Moderator
Join Date: Mar 2011
Location: south africa
Posts: 135
![]() |
Hi me again.The head should be finish next week can wait.So i hade some money to spent so bought a new turbo a garret rated at 700hp.Can any one help me i want to buy full slicks MT or MH was thinking of getting 26/15/11 will it fit.
|
|
|
|
|
|
#3 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
![]() |
Quote:
I'm also 100% sure you won't fit 15s with TT brakes - you'll have to downgrade the rear brakes to Mkiv n/a rear calipers and rotors.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
|
#4 |
|
Moderator
Join Date: Mar 2011
Location: south africa
Posts: 135
![]() |
The 15 inch rims fit.fitted them last night must get the right offset.
|
|
|
|
|
|
#5 |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
![]() |
You must not have rear TT brake calipers then...
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
#6 |
|
Moderator
Join Date: Mar 2011
Location: south africa
Posts: 135
![]() |
Took my crank pulley of but broke it it was stuck can i replace it with a aluminium pulley.
|
|
|
|
|
|
#7 |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
![]() |
I'd recommend against this course of action. What you took off wasn't (just) a crank pulley - it's a harmonic dampener too. You need to replace it with another harmonic dampener + pulley ... either a new oem one, or ATI or any of the other aftermarket dampeners for the 2jz-gte. Please post if you have questions about any particular brand (other than oem or ATI, which both work fine).
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Greetings! | importauto | Import Auto Center | 7 | 06-21-2009 07:42 AM |
| Help needed in first pass at improved appearance | finaltable | Exterior , Interior, and Detailing | 1 | 06-29-2008 06:34 AM |
| Before buying an 85 P Supra with 123k what to look for | e30cabrio | MKII Supra | 0 | 02-24-2008 08:09 PM |
| 6 point Roll Cage? | carl johansson | Road Racing & Autocross | 0 | 12-01-2007 12:28 AM |
| MEET UP's | TEAM_Bastos | Drifting | 0 | 03-02-2006 09:09 PM |