Thread: need help making power 94tt
View Single Post
Old 03-17-2012, 02:21 PM   #89
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default
Quote:
Originally Posted by warmkop View Post
so i decided to take the head off so that the head can be recond and the company is grinding the cams to 272 8.3mm lift.do you know that brand of gasket evergreen or do i just buy a toyota head gasket or a cometic.
A stock head gasket is fine for a 2jz-gte. Exceptions might be a very high lift cam (which is excellent for forced induction, by the way), and a custom valve seat job (eg. 7 angle, full radius, etc.).
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.

NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.
pwpanas is offline   Reply With Quote