|
|
01-09-2006, 08:07 PM
|
#1 | |
|
3" Exhaust
Join Date: Oct 2005
Posts: 221
 |
Quote:
Now of course the 2jz blocks are strong to begin with but like every motor it has its limit. 1400cc injectors with a T88 turbo is obviously pushing it. Also we dont know what type of engine management you are using but if its not adequate then that could mean problems as well. Now imho I would tear it down and do a complete engine rebuild with forged goodies to prevent that from happeneing again. Oh and if you are running that much boost and fuel I would highly recommend getting a standalone or at least the emanage. |
|
|
|
|
01-09-2006, 08:18 PM
|
#2 | ||||||
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
Quote:
Quote:
 Please post a link to where YOU last purchased a set of them.Also note we don't know which model of GReddy T88 that he's running, nor do we know his target/max boost level, nor the type of fuel he plans to run. Why are you making assumptions and jumping to conclusions about what do do with his engine, before we're even sure if we have his ignition problem solved? Quote:
 It's called an AEM...what did you think he was talking about - a cold-air intake? Quote:
Quote:
It's called an AEM.Again, please don't post on technical threads in this forum anymore, unless it happens to be a thread that you're certain you know what you're talking about. For example, if you've EVER personally worked on a Supra as highly modified as 94T88Widebody's please post your reference(s) immediately (yes, I will contact them). If not, please don't further pollute threads like this with any more of your wild guesses. Your lack of understanding, misinformation and potentially bad advice is getting in the way of us trying to help 94T88Widebody get his ignition & engine problems solved...
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. Last edited by pwpanas; 01-09-2006 at 09:14 PM. |
||||||
|
|
|
|
01-10-2006, 04:21 AM
|
#3 |
|
Stock
Join Date: Jan 2006
Location: Yuma, Az
Posts: 17
|
no need for argument here! I am well on the way to getting that damn gear off the main.. What a pain... it is about 90% off and I needed a quick break.
I understand that I have low compression. I fully plan to build a block that can keep up with my externals. I know now even with the low compressoin the car is running 788 to the wheels on C16 with 32psi of boost. I am still pumping ryan for the Dyno sheet.. I think he has forgoten I than EVERYBODY for thier opinions... I do appologize for not having the images you guys want to see just yet...you can see some images as the parts were being added and you can see an exterior shot in my myspace profile www.myspace.com/dingholla |
|
|
|
|
01-10-2006, 01:27 PM
|
#4 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
I'd suggest that, as soon as we verify your spark is functioning properly again (after the CPS gear has been repaired), we begin troubleshooting on your engine's compression (and melted plug in #4) ... as well as the various options to best resolve those problems. For example, we need to delve into: precisely state your horsepower goals, identify the exact type of fuel you plan to run (c16 full-time?), and detail your application (eg. drag racing?). Until we've identified all of these items, and gone through a proper troubleshooting process, it may be premature to conclude that your block must be 'built'. Among the troubleshooting steps I'd suggest include another compression test (with a different gauge and some tips I'll give you to ensure optimal accuracy), followed by a leakdown test...but again let's ensure your ignition is 100% fixed after you reassemble, and then we can get into the other issue.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. Last edited by pwpanas; 01-10-2006 at 02:26 PM. |
|
|
|
|
|
01-12-2006, 01:29 AM
|
#5 |
|
Stock
Join Date: Jan 2006
Location: Yuma, Az
Posts: 17
|
just a quick note.. the car is running great.. I will be back for the follow ups soon... I was not running C16...
I was running 91 octane and 18lbs of boost... the block is STOCK |
|
|
|
|
01-17-2006, 10:38 PM
|
#6 |
|
Stock
Join Date: Jan 2006
Location: Yuma, Az
Posts: 17
|
engine bay pics you wanted
Engine Bay photos!
  
|
|
|
|
|
01-20-2006, 01:36 PM
|
#7 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
If you don't mind me saying so though, that's an awefully big turbo, intake & throttle body to be running with stock cams... Are you sure your turbo is a GReddy T88? From those pictures, it doesn't look like a GReddy T88 to me...
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. Last edited by pwpanas; 01-20-2006 at 01:54 PM. |
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 87 Supra won't start | RNEMESiS42 | MKIII Supra | 3 | 06-25-2011 06:30 PM |
| Car wont start hot | carfanatic89 | MKIII Supra | 41 | 03-30-2009 10:58 PM |
| My car decides when it wants to start | carfanatic89 | MKIII Supra | 16 | 02-12-2008 07:50 PM |
| Car Died...where to start? | Jrew | MKIII Supra | 4 | 10-26-2007 02:19 PM |
| no start | 87supraguy | MKIII Supra | 5 | 03-23-2006 07:31 AM |
Hybrid Mode
