Trouble Shooting a 1989 Supra Turbo

[snowball]

shaeff vbmenu_register("postmenu_3738552", true);
*15psi bliss*

Join Date: Feb 2004
Location: Hudson Valley, NY
Age: 21
Posts: 371
Trader Rating: (4)



Quote:
Originally Posted by BFR1992T
and if the notches in the cam gears do not line up after tensioning the belt you may need to use the left or right holes in the cam gears and cams.



i've never heard of them NOT lining up... he should be fine.

-shaeff

[snowball]

shaeff vbmenu_register("postmenu_3738562", true);
*15psi bliss*

Join Date: Feb 2004
Location: Hudson Valley, NY
Age: 21
Posts: 371
Trader Rating: (4)



are you getting fuel, air and spark?

if so:

then your timing is most likely still off. check the codes, and see what the CEL tells you.

-shaeff

[snowball]

snowball vbmenu_register("postmenu_3738575", true);
89 Turbo



Join Date: Oct 2004
Location: Farmington hills, MI
Age: 16
Posts: 70



ya everything lines up..... (well not everything lol) something is wrong....
snowball vbmenu_register("postmenu_3738581", true);
89 Turbo

http://supraforums.com/forum/image.p...ine=1132933386

Join Date: Oct 2004
Location: Farmington hills, MI
Age: 16
Posts: 70


Ok, ya I have read so many post on check the codes and what not… but I never found something that explained the whole thing…
It is set at 0* and the cams line up….

[snowball]

vbmenu_register("postmenu_3738622", true);
Newbie

Join Date: Oct 2005
Location: B.C.
Age: 17
Posts: 49
Trader Rating: (0)



hey iv been readin your forume. im gunna sudgest a cupple things here. 1 you said that it has been sittin for a month see if its posible to find any water in your gas, 2 pull all the spark plugs out and then pull the coil plug out so that the plugs dont get any spark. then turn the engine over you probly have lots of water in there. make sure your plugs are nice cleen and dry, then put them back in

wow man look at your coil pack, the right coil pack is backwards, dude i think thats your problem it goes (left coil 1,6- center 3,4- right 5,2) if im seein it correctly you have cylinder 5,2 backwards try that and chek the coils for cracks i had to buy a new one for cylinder 1,6 it had a cupple cracks in it
im pritty sure thats your problem get back to me
harry

[snowball]

harry89supra vbmenu_register("postmenu_3738654", true);
Newbie

Join Date: Oct 2005
Location: B.C.
Age: 17
Posts: 49
Trader Rating: (0)



shit hahah my bad man, ya it is 16 34 25 its fine
but check for cracks on it u could have a dead coil

[snowball]

snowball vbmenu_register("postmenu_3738998", true);
89 Turbo



Join Date: Oct 2004
Location: Farmington hills, MI
Age: 16
Posts: 70
Trader Rating: (1)



Yes, I had a quarter of gas in the tank and then I put lots more gas in and now I have more then half. So if there was any water in there. It should be diluted by now. But yet I have taken off the spark plugs and looked in there and I found some kind of liquid and sucked it put several times. And still no go….

[snowball]

BFR1992T vbmenu_register("postmenu_3739023", true);
Moo



Join Date: Feb 2002
Location: Ohio
Posts: 207
Trader Rating: (0)



Quote:
Originally Posted by shaeff
i've never heard of them NOT lining up... he should be fine.

-shaeff



Stretched timing belt or milled head/block deck will cause them to not line up.