The 1JZ/7M Front facing intake manifold??

joshtexican · 05-06-2010, 03:53 PM

Thats what I was looking for man a fast but reliable ride. I currently have an 86 7mge and everyone wants a peice of it but its my daily!

Someone did tell me With what I have done to the motor I could just use my stock turbo system and turn the boost up. I do have a t3/t4 manifold already, but I might just put stock turbo system on-turn up the boost-see how I do-then upgrade later on.

I am still going to try and get my hands on one of them 1JZ intakes and a throttle body and I will go from there.

reydio · 05-06-2010, 05:33 PM

Hmmmm, I don't think the 1JZ/2JZ FFIM will drop into the 7M without any modifications. I know there is a couple of people that makes the 7M FFIM, one is Seth, Ron, and Lipp(I don't think they finished the prototype though).

I suggest doing a research first before you decide to jump in. It's not something cheap.

http://www.supramania.com/forums/sho...r-custom-parts

kwnate · 05-07-2010, 02:37 AM

Quote:

Originally Posted by reydio

Hmmmm, I don't think the 1JZ/2JZ FFIM will drop into the 7M without any modifications. I know there is a couple of people that makes the 7M FFIM, one is Seth, Ron, and Lipp(I don't think they finished the prototype though).

I suggest doing a research first before you decide to jump in. It's not something cheap.

http://www.supramania.com/forums/sho...r-custom-parts

Someone with a brain. Thank you! There's so much bad advice in this thread. I'm outta here.

supraflymkiii · 05-07-2010, 04:19 AM

There's no way in hell with adding that and the mods you already have that you'll be close to 500 whp. The stock CT is only good for about 350 whp. And they do make upgraded CT's they have a 57 trim which is good for around 400 whp and they have a 61 trim which would probably be good for what you're shooting for. But in order to accomplish those numbers you'll probably going to want to get a MAFT pro setup or something along those lines. I don't even think a 7M with a LEX AFM can flow enough air to make 500 whp. To make that much horsepower you're looking at quite a bit of money, and a 500 whp 7M is not going to be very reliable unless you get it tuned very good and a professional tune is going to be quite pricey as well. So do your research and you'll find that you're looking at a lot more work than you think to make those kind of numbers.

kamikazemkiii · 05-08-2010, 01:22 AM

Quote:

Originally Posted by kwnate

Someone with a brain. Thank you! There's so much bad advice in this thread. I'm outta here.

X2 wow...
were are you in NC? and no the 1jz/2jz intake manifolds wont work

joshtexican · 05-08-2010, 02:52 PM

I know right!!

I'm located in the Raleigh area...

kamikazemkiii · 05-08-2010, 06:26 PM

im up that way alot, what color is your supra

joshtexican · 05-09-2010, 06:06 PM

Ok cool, My supra is white.

It has a damaged front end on it (no bumper), a dark green left side fender (working on the body now), and lexus wheels on it.

Do you go to the meets on US1 by Sheetz?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Sleeping Beast	Supra2NR	Show n Tell	16	03-29-2010 07:58 PM
5mge intake manifold upgrade	Allen Crump	Non-Generation Specific Questions	1	11-02-2006 01:53 AM
intake manifold has coolant what did i do wrong?	91toy supra	MKIII Supra	6	09-16-2006 02:46 PM
custom intake manifold	j3pz	MKIII Supra	8	12-07-2005 06:23 PM

05-06-2010, 03:53 PM	#1
joshtexican 3" Exhaust Join Date: Apr 2010 Location: NC Posts: 136	Thats what I was looking for man a fast but reliable ride. I currently have an 86 7mge and everyone wants a peice of it but its my daily! Someone did tell me With what I have done to the motor I could just use my stock turbo system and turn the boost up. I do have a t3/t4 manifold already, but I might just put stock turbo system on-turn up the boost-see how I do-then upgrade later on. I am still going to try and get my hands on one of them 1JZ intakes and a throttle body and I will go from there.

05-06-2010, 05:33 PM	#2
reydio Intake Join Date: Dec 2009 Location: Pearl City, HI Posts: 33	Hmmmm, I don't think the 1JZ/2JZ FFIM will drop into the 7M without any modifications. I know there is a couple of people that makes the 7M FFIM, one is Seth, Ron, and Lipp(I don't think they finished the prototype though). I suggest doing a research first before you decide to jump in. It's not something cheap. http://www.supramania.com/forums/sho...r-custom-parts

05-07-2010, 04:19 AM	#4
supraflymkiii 3" Exhaust Join Date: Sep 2005 Location: Menasha, WI Posts: 63	There's no way in hell with adding that and the mods you already have that you'll be close to 500 whp. The stock CT is only good for about 350 whp. And they do make upgraded CT's they have a 57 trim which is good for around 400 whp and they have a 61 trim which would probably be good for what you're shooting for. But in order to accomplish those numbers you'll probably going to want to get a MAFT pro setup or something along those lines. I don't even think a 7M with a LEX AFM can flow enough air to make 500 whp. To make that much horsepower you're looking at quite a bit of money, and a 500 whp 7M is not going to be very reliable unless you get it tuned very good and a professional tune is going to be quite pricey as well. So do your research and you'll find that you're looking at a lot more work than you think to make those kind of numbers.

05-08-2010, 02:52 PM	#6
joshtexican 3" Exhaust Join Date: Apr 2010 Location: NC Posts: 136	I know right!! I'm located in the Raleigh area...

05-08-2010, 06:26 PM	#7
kamikazemkiii 3" Exhaust Join Date: Mar 2009 Location: raleigh Posts: 138	im up that way alot, what color is your supra

05-09-2010, 06:06 PM	#8
joshtexican 3" Exhaust Join Date: Apr 2010 Location: NC Posts: 136	Ok cool, My supra is white. It has a damaged front end on it (no bumper), a dark green left side fender (working on the body now), and lexus wheels on it. Do you go to the meets on US1 by Sheetz?