Got A Code 52

MK3PIMP · 08-08-2008, 10:01 PM

I Checked For Codes And Got A Code 52 Knocksensor I Checked They Look Good So I Checked The Wire On The Sensor And It Goes Up By The Throttle Body But They Are Cut Right There Thats Where They Stop So I Wanted To Know Were Do They Go Any Help Will Be Nice Thanx

Busted Knuckles · 08-09-2008, 09:41 AM

It should continue all the way the the ECM. You'll need to check all the wiring associated with the ECM o the engine to find the other end. The wire colors should match up.

Gunnar · 08-12-2008, 10:00 AM

If you unplug the ecu you will see there is two transparent wires in the connectors these are the ones that should go to the knock sensors. You can rewire from there to your engine bay, and use shielded cable which you ground on ONE end.

08-08-2008, 10:01 PM	#1
MK3PIMP Intake Join Date: Mar 2008 Location: LANCASTER Posts: 49	Got A Code 52 I Checked For Codes And Got A Code 52 Knocksensor I Checked They Look Good So I Checked The Wire On The Sensor And It Goes Up By The Throttle Body But They Are Cut Right There Thats Where They Stop So I Wanted To Know Were Do They Go Any Help Will Be Nice Thanx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KS code, and no KS connector?	Scionguy	MKIII Supra	5	08-28-2008 08:15 PM
code 14 and 52	west_side_supra	MKIII Supra	30	06-02-2008 05:04 PM
Where EXACTLY is the key code?	finaltable	MKIII Supra	6	08-12-2007 01:26 AM
still the getting code 52	whitequasimodo	MKIII Supra	9	11-17-2006 12:34 AM
getting wierd error code and need general advice please	noredline	MKIII Supra	7	10-01-2006 05:23 AM

08-09-2008, 09:41 AM	#2
Busted Knuckles 12psi boost Join Date: Dec 2007 Location: Atlanta Posts: 300	It should continue all the way the the ECM. You'll need to check all the wiring associated with the ECM o the engine to find the other end. The wire colors should match up.

08-12-2008, 10:00 AM	#3
Gunnar Intake Join Date: Sep 2007 Location: Belgium Posts: 38	If you unplug the ecu you will see there is two transparent wires in the connectors these are the ones that should go to the knock sensors. You can rewire from there to your engine bay, and use shielded cable which you ground on ONE end.