Got A Code 52

Gunnar · 08-12-2008, 10:00 AM

If you unplug the ecu you will see there is two transparent wires in the connectors these are the ones that should go to the knock sensors. You can rewire from there to your engine bay, and use shielded cable which you ground on ONE end.

08-12-2008, 10:00 AM	#3
Gunnar Intake Join Date: Sep 2007 Location: Belgium Posts: 38	If you unplug the ecu you will see there is two transparent wires in the connectors these are the ones that should go to the knock sensors. You can rewire from there to your engine bay, and use shielded cable which you ground on ONE end.