Need help pinpointing where this stuff goes

cre · 02-04-2012, 09:34 PM

I suggest you start taking pictures before dismantling something and use masking tape to label the articles once removed.

#1 - Upper bracket for the power steering pump.

#2 - Is a vacuum hard pipe which mounts by runners #5 and #6 at the union of the upper and lower halves of the intake plenum.

#3 - Personally I wouldn't have even tried to take that apart... but you got it apart and with a little kick to the memory center you'll probably remember how you did it.

#4 - Is part of the EGR plumbing. It connects at the rear of the surge tank. Be sure to clean out the rest of the EGR's plumbing which runs into the surge tank and exits at the union in the center of the Y pipe.

EDIT: Here's a diagram which shows most of the vacuum hose routing. The hard pipe is all the way to the right. http://www.cygnusx1.net/Supra/Librar...spx?F=1708&P=2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
part out lots of new stuff cheap need sold asap	marcmann982	Parts For Sale	16	03-06-2012 05:26 AM
Too much stuff to buy not enough money	lacrosseg64	MKIII Supra	5	07-11-2009 11:31 PM
basic oil stuff	tone loc	Off Topic Forum	8	10-24-2006 08:19 PM
how to take off all emmisions stuff	boner1115	MKIII Supra	6	11-05-2005 04:27 AM

02-04-2012, 09:34 PM	#3
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I suggest you start taking pictures before dismantling something and use masking tape to label the articles once removed. #1 - Upper bracket for the power steering pump. #2 - Is a vacuum hard pipe which mounts by runners #5 and #6 at the union of the upper and lower halves of the intake plenum. #3 - Personally I wouldn't have even tried to take that apart... but you got it apart and with a little kick to the memory center you'll probably remember how you did it. #4 - Is part of the EGR plumbing. It connects at the rear of the surge tank. Be sure to clean out the rest of the EGR's plumbing which runs into the surge tank and exits at the union in the center of the Y pipe. EDIT: Here's a diagram which shows most of the vacuum hose routing. The hard pipe is all the way to the right. http://www.cygnusx1.net/Supra/Librar...spx?F=1708&P=2 __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> Last edited by cre; 02-04-2012 at 09:37 PM.