|
![]() |
#1 |
walbro fp
Join Date: Sep 2005
Location: Kearny, New Jersey, USA
Posts: 427
![]() |
![]()
The TSRM pics suck at showing the lever and stop. I tried taking a picture but my photogrophy skills leave a lot to be desired. I'll try to explain it, if I can. On the NA, behind the throttle body you will find the "linkage", the cable that pulls when you step on the accelerator. With your car running (and in neutral, of course), pull the linkage to rev the engine. You will see a lever pull back, and a space open between it and a small rod with a rubber boot on it. Let go of the linkage and they will come back together closing the space. Hope that helps. If anyone else would like to add to this, feel free, as I am not an expert.
Scruffboy |
![]() |
![]() |
![]() |
#2 |
20psi boost
Join Date: May 2006
Location: New Haven/Hamden
Posts: 793
![]() |
![]() ![]() The nut (with the yellow paint on it) and stud in the middle of this picture is your stop screw. The throttle lever is touching the bottom of it. |
![]() |
![]() |
![]() |
#3 |
12psi boost
Join Date: Apr 2006
Location: Georgia
Posts: 250
![]() |
![]()
it sounds like your talking about the the idle adjustment screw. is that where it needs to go? or is it somewhere near that? im about to look at my car to make sure but am i close?
__________________
My cars: 85 Trans Am- Ehhh- Gone 83 Rx7- Much Better- Gone 86.5 Supra- Love- Not Gone |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Headliners | scruffboy | Non-Generation Specific Questions | 3 | 08-14-2007 08:19 PM |
Happy Anniversary! | scruffboy | Non-Generation Specific Questions | 2 | 06-04-2007 12:02 PM |
Dear Mr.Nickleye | scruffboy | Non-Generation Specific Questions | 1 | 04-12-2007 02:14 PM |
Tune Up | scruffboy | Non-Generation Specific Questions | 7 | 01-21-2007 09:58 PM |
Hey Mr.Nickleye, | scruffboy | Non-Generation Specific Questions | 4 | 01-01-2007 06:34 PM |