Tri angle valve jobs

supraman121 · 05-26-2007, 06:34 PM

I heard that this will increase the power of the stock engine for relatively cheap? i was woundering if anyone has had this done, how much it cost, and what the horsepower gain was?

mattfurlani · 05-27-2007, 01:19 AM

I've never done it personally, but a 3avj is definately been proven to increase performance.

It might not be worth the money though.

supraman121 · 05-27-2007, 04:40 AM

i was told it was relitavly inexpensive, do you know how it is done? do you have to completly remove the valve or can they get to them without taken the engine apart?

mattfurlani · 05-29-2007, 03:03 PM

uh well you have to shave the valve seat in three seperate angles. I think it is 31/46/60 and i cna't particularly remembver if you need to take everything apart but just imagine remmoving your head from your car.

That's how much work it is.

so fdor a supra its romving intake, cooling system, exhaust, and many things like egr, vsv's, and a buncha other things i can't ermember.

almost everything but the block. a good 10 hours of labor with the right tools and know how

then its like $200 to havfe it angles done at a machine shop... a good priced shop at that.

Kuban · 05-29-2007, 07:54 PM

Quote:

Originally Posted by mattfurlani

uh well you have to shave the valve seat in three seperate angles. I think it is 31/46/60 and i cna't particularly remembver if you need to take everything apart but just imagine remmoving your head from your car.

That's how much work it is.

so fdor a supra its romving intake, cooling system, exhaust, and many things like egr, vsv's, and a buncha other things i can't ermember.

almost everything but the block. a good 10 hours of labor with the right tools and know how

then its like $200 to havfe it angles done at a machine shop... a good priced shop at that.

yea and lets not forget you should pull your block out and have it decked while your at it. Its only an extra day of labor. You mine as well spend 500 at a machine shop and have them port, polish, and do a valve job.

supramacist · 05-29-2007, 08:19 PM

Yep. Just sac up and get the p&p.

If you don't you'll just end up wishing you had.

supraman121 · 05-30-2007, 06:16 AM

screw trying to get power out of an NA motor i need to find some place that sells 7mgte front clips or 1jz front clips then i would be in heaven lol

05-26-2007, 06:34 PM	#1
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	Tri angle valve jobs I heard that this will increase the power of the stock engine for relatively cheap? i was woundering if anyone has had this done, how much it cost, and what the horsepower gain was? __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

05-27-2007, 01:19 AM	#2
mattfurlani 3" Exhaust Join Date: Aug 2006 Location: Rhode Island Posts: 63	I've never done it personally, but a 3avj is definately been proven to increase performance. It might not be worth the money though. __________________ Its broke, it could be anything, and cost of repairs will greatly exceed the value of the car

05-27-2007, 04:40 AM	#3
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	i was told it was relitavly inexpensive, do you know how it is done? do you have to completly remove the valve or can they get to them without taken the engine apart? __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

05-29-2007, 03:03 PM	#4
mattfurlani 3" Exhaust Join Date: Aug 2006 Location: Rhode Island Posts: 63	uh well you have to shave the valve seat in three seperate angles. I think it is 31/46/60 and i cna't particularly remembver if you need to take everything apart but just imagine remmoving your head from your car. That's how much work it is. so fdor a supra its romving intake, cooling system, exhaust, and many things like egr, vsv's, and a buncha other things i can't ermember. almost everything but the block. a good 10 hours of labor with the right tools and know how then its like $200 to havfe it angles done at a machine shop... a good priced shop at that. __________________ Its broke, it could be anything, and cost of repairs will greatly exceed the value of the car

05-30-2007, 06:16 AM	#7
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	screw trying to get power out of an NA motor i need to find some place that sells 7mgte front clips or 1jz front clips then i would be in heaven lol __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

05-29-2007, 08:19 PM	#6
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	Yep. Just sac up and get the p&p. If you don't you'll just end up wishing you had.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bad Proportioning Valve?	georides	Non-Generation Specific Questions	5	03-05-2009 03:34 AM
valve cover gasket question?	sevenmgte	MKIII Supra	8	10-01-2008 06:02 AM
88 Turbo Leaking Valve Cover Gaskets	Sheridan	MKIII Supra	1	11-05-2007 01:03 AM
egr valve... reusable?	sd88supra	MKIII Supra	3	06-22-2007 06:28 AM
Valve stem seals?	Kuban	MKIII Supra	9	03-27-2007 02:32 AM