|
![]() |
#1 |
3" Exhaust
Join Date: Jul 2005
Posts: 67
![]() |
![]()
In my case I live in a big dismantler city. It's quite easy to find a used Supra and get the gauges out of it. If it's hard to find one I could help you out.
__________________
![]() |
![]() |
![]() |
![]() |
#2 |
3" Exhaust
Join Date: Apr 2007
Location: Waco
Posts: 164
![]() |
![]()
alright i fixed the speedo i just took the needle off and moved it over to the 0 spot (pretty simple) but i still cant figure the turnsignals out my hazards still work but the turns dont not in or out of the car. An no blown fuses I dont know what i can do i guess just a process of elimination
__________________
Supra Engine Powered Dragster |
![]() |
![]() |
![]() |
#3 |
3" Exhaust
Join Date: Jul 2005
Posts: 67
![]() |
![]()
Hmmm well they stopped working after you took out the gauge cluster right? It's it possible you miss putting in a plug or didn't plug it in all the way?
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
3" Exhaust
Join Date: Apr 2007
Location: Waco
Posts: 164
![]() |
![]()
i dont think i did but i could have ill work on it more 2morrow mabye ill have better luck
__________________
Supra Engine Powered Dragster |
![]() |
![]() |
![]() |
#5 |
3" Exhaust
Join Date: Apr 2007
Location: Waco
Posts: 164
![]() |
![]()
now that i think of it i had trouble with the column switch when i first bought the car. I had to dismantel it and put it back together and it took about a week for it to say on like its suppost to. I would have to click in into the turn position then put pressure on it to get it to turn on Ill test it and see what i come up with
__________________
Supra Engine Powered Dragster |
![]() |
![]() |
![]() |
#6 |
3" Exhaust
Join Date: Jul 2005
Posts: 67
![]() |
![]()
Yeah when I changed out the old 86.5 column control switch to a newer 89+ switch I had to modify the contact wires for the cruise control. There was one extra wire on the harness of the new one that I had to eliminate. Doing so required me to take apart the column control switch and I can see how if something isn't aligned or press fitted properly it won't work. It's possible maybe a snap fit flange broke off and that's why you have to press down on it with pressure to get it to work.
__________________
![]() |
![]() |
![]() |
![]() |
#7 |
3" Exhaust
Join Date: Apr 2007
Location: Waco
Posts: 164
![]() |
![]()
im just straight up getting pissed now. I have checked EVERTHING on this car. This is a list of all the things i have checked. Turn switch, fuse, voltage to the fuse, the guage cluster, all the bulbs and sockets, relay, voltage to the turn switch and every thing is fine what the hell is the problem the onlything i can think of is the wires to the lights but y would it just all the sudden stop working after the guage is removed and put back in, and for that matter the hazards work so it couldnt be the wires to the bulbs. Would that little box under the left brake light assembly in the rear. I know it has something to do with the turn signals.
__________________
Supra Engine Powered Dragster Last edited by carfanatic89; 09-27-2007 at 07:31 PM. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
oil pressure sensor | sundevil1 | MKIII Supra | 2 | 12-06-2008 08:21 PM |
Fuel pump relay and pressure. | carfanatic89 | MKIII Supra | 8 | 05-01-2008 06:39 PM |
Whats The Thread on The Oil Pressure Sensor? | Chambers | MKIII Supra | 2 | 01-22-2008 02:24 PM |
pressure sensor? | west_side_supra | MKIII Supra | 3 | 10-25-2007 05:23 PM |
Knock sensor for an N/A. | rnoswal | MKIII Supra | 2 | 11-16-2005 05:12 PM |