name that part

Supra2NR · 08-07-2006, 04:24 PM

yup that true
got a na 88 it has the metal backing but
that molding is not gonna stay there for long

damdog05 · 08-07-2006, 10:06 PM

i think the trim on mine has been in the sun too long. it has stretched and is peeling off the backing. thats the problem im having...i dont see any rust.

OmeGa · 08-08-2006, 12:37 AM

If it is just falling off due to rust its very easy to fix. Some of mine was falling off/bulging due to rust.

What you do is take the entire strip off that is rusted, clean off the rust out with a screw driver or something that you can scrape all the metal off with. Then you go but a can of "One Step" or primer to keep any rust from coming back, or running down if it rains ect. Then you silicone it back on, I used blue painters tape to keep it in place for atleast 24 hours. Then finaly you take some black silicon and fill in the top and botton to keep water from going under it.

That is the way to go if you can't afford all new stuff. I will say it looks a lot better than it did, but its not 100% perfect because I was in a rush and didnt clean all the rust out.

08-07-2006, 04:24 PM	#1
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	yup that true got a na 88 it has the metal backing but that molding is not gonna stay there for long __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

08-07-2006, 10:06 PM	#2
damdog05 12psi boost Join Date: Apr 2006 Location: Georgia Posts: 250	i think the trim on mine has been in the sun too long. it has stretched and is peeling off the backing. thats the problem im having...i dont see any rust. __________________ My cars: 85 Trans Am- Ehhh- Gone 83 Rx7- Much Better- Gone 86.5 Supra- Love- Not Gone

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My 88 Part List	Grandavi	MKIII Supra	18	05-24-2009 11:04 PM
I need a part. (rear end)	boner1115	Non-Generation Specific Questions	1	10-20-2005 09:27 AM

08-08-2006, 12:37 AM	#3
OmeGa 3" Exhaust Join Date: Jul 2006 Location: Columbus Posts: 86	If it is just falling off due to rust its very easy to fix. Some of mine was falling off/bulging due to rust. What you do is take the entire strip off that is rusted, clean off the rust out with a screw driver or something that you can scrape all the metal off with. Then you go but a can of "One Step" or primer to keep any rust from coming back, or running down if it rains ect. Then you silicone it back on, I used blue painters tape to keep it in place for atleast 24 hours. Then finaly you take some black silicon and fill in the top and botton to keep water from going under it. That is the way to go if you can't afford all new stuff. I will say it looks a lot better than it did, but its not 100% perfect because I was in a rush and didnt clean all the rust out.