7MGE - Stuck with changing Head Gasket???

[wishesforjdmswap]

the fuel pressure line under the intake will hold the head on and it goes through the intake and is held on at the back of the fuel rail

[suprra_girl]

make sure all wiring plugs have been unplugged, all fuel lines, and the water hoses at the back are removed from the main water pipe which goes under the exhaust manifold

can't think of anything in particular that may be holding... stick you hand all around the intake & exhaust side and just feel around

at what area is it holding down?

[pasupra]

Originally Posted by wishesforjdmswap

the fuel pressure line under the intake will hold the head on and it goes through the intake and is held on at the back of the fuel rail

na, thats already off

Originally Posted by suprra_girl

make sure all wiring plugs have been unplugged, all fuel lines, and the water hoses at the back are removed from the main water pipe which goes under the exhaust manifold

can't think of anything in particular that may be holding... stick you hand all around the intake & exhaust side and just feel around

at what area is it holding down?

We havent disconnected all the wiering completly, but the fuel rail is already off, and the top half of the intake and also everyting on the fron + exhaust sides. And I cant really tell what area its holding down casue the studs that hold it in place (dowls??) stop you from angeling it.

Any other ideas? WE'll go have another look now .

-Pascal