How to clean injectors?

f00g00 · 06-22-2006, 05:49 AM

Well scince you went to all that trouble.
I did it with them removed by getting some carb cleaner and put a little tape aroung the straw that came with the carb cleaner so when installed in the fuel inlet it had a good fit. The you need to open the injector so I had an injector plug from an old harness, hooked the wires to 12 volts and sprayed till the pattern was good once the injector was open.
A little advice though is wear some goggles or something to protect your eyes from getting flying debri or cleaner in them.
Now I use the method mrnickleye talked about here.
http://www.toyota-supra.info/forums/...ead.php?t=4658

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A Few Q's on Turbo Injectors	Chambers	MKIII Supra	9	11-06-2007 03:26 AM
Fuel injectors	redneck ricer	MKIII Supra	0	06-15-2007 02:31 AM
Cleaning Intake & Injectors	mrnickleye	Supra FAQ	6	03-23-2007 04:26 AM

06-22-2006, 05:49 AM	#4
f00g00 12psi boost Join Date: Aug 2005 Location: Kuwait Posts: 292	Well scince you went to all that trouble. I did it with them removed by getting some carb cleaner and put a little tape aroung the straw that came with the carb cleaner so when installed in the fuel inlet it had a good fit. The you need to open the injector so I had an injector plug from an old harness, hooked the wires to 12 volts and sprayed till the pattern was good once the injector was open. A little advice though is wear some goggles or something to protect your eyes from getting flying debri or cleaner in them. Now I use the method mrnickleye talked about here. http://www.toyota-supra.info/forums/...ead.php?t=4658