Intercooler setup Pic Request and Questions

[El Supracabras]

http://cgi.ebay.com/ebaymotors/89-92...item27bbd268a4
This looks like a newer version of the one I bought 2 years ago. I bought directly from cxracings ebay store. I have had zero problems other than the piping for the pcv and vac lines don't line up with the bolt holes on the crossover pipe (3000 pipe replacement) and the intercooler itself is much heavier than the stock one. It also is NOT a direct bolt at all. I had to relocate my oil cooler, horns, coolant reservoir, steering cooler, make brackets (which I think are now included) and modify the hood latch support a little so it would clear the front crash bar.
Good luck, and don't you think it's time you put some pics of the beast up?

[Semper_Fi]

Originally Posted by El Supracabras

http://cgi.ebay.com/ebaymotors/89-92...item27bbd268a4
This looks like a newer version of the one I bought 2 years ago. I bought directly from cxracings ebay store. I have had zero problems other than the piping for the pcv and vac lines don't line up with the bolt holes on the crossover pipe (3000 pipe replacement) and the intercooler itself is much heavier than the stock one. It also is NOT a direct bolt at all. I had to relocate my oil cooler, horns, coolant reservoir, steering cooler, make brackets (which I think are now included) and modify the hood latch support a little so it would clear the front crash bar.
Good luck, and don't you think it's time you put some pics of the beast up?

Im posting pics as soon as im done with the intercooler kit... but i can show progress so far. Shes kinda ruff. Thanks again BRO!!!!!!
Can i ask for one more. How does ur intake fit? Also my Intercooler outlets are located on east and west... so i gotta figure how to redo the piping...

[El Supracabras]

Easiest solution for your intercooler design is a FFIM. Mo' money!
When I first got mine, I looked at it carefully to check for crappy welds, holes, cracks or other problems (i was skeptical of its ebayness). It seems that it is just a regular intercooler with one of the side outlets cut off and welded shut (very cleanly) and a 90 degree elbow was welded to the bottom of the side tank facing the other way instead. I thought it was a pretty cool idea actually.

[Semper_Fi]

Originally Posted by El Supracabras

Easiest solution for your intercooler design is a FFIM. Mo' money!
When I first got mine, I looked at it carefully to check for crappy welds, holes, cracks or other problems (i was skeptical of its ebayness). It seems that it is just a regular intercooler with one of the side outlets cut off and welded shut (very cleanly) and a 90 degree elbow was welded to the bottom of the side tank facing the other way instead. I thought it was a pretty cool idea actually.

Thanks again bro. I have a supra guy in my area, that builds supras... he made his own kit, and sells it for 250$ So by monday, i should be tested out his equipment, and ofcourse, writing out a good review. Hell maybe ill even put a "how to make diy intercooler kit."

Thanks again supracabra!

[El Supracabras]

Hey no problemo!
I'm sure many people would be interested in a DIY intercooler upgrade write up. Good luck.