03-17-2011, 09:08 PM
|
#16 |
|
Intake
Join Date: Feb 2011
Location: South of Columbus, Ohio
Posts: 45
 |
Idk this isn't really sitting right with me for some reason. When i got the flywheel I laid it on top of the old flywheel and checked to see if it had the same number of teeth. It was the SAME size and everything. But I crawled under the car today and loosened the bellhousing bolts and I got the engine to turn over (by ratchet) about 1/8-1/4". It wasn't very much but it was more than before.
Can anybody confirm the differences in the W58 and R154 flywheels? Either way, I'm dropping the tranny next week so I will def be getting to the bottom of this! I'll keep you posted.
__________________
86.5 Supra NA: milled head .020, decked block .007, .5mm+ pistons, port & polished intake manifold and cyl head,OBX header, 3-angle, cold air intake, Cometic MLS HG. ALL NATURAL!  CHEVROLET- Cracked Heads, Every Valve Rattles, Oil Leaks Every Time FORD- Flipped Over, Rebuilt Dodge DODGE- Dirty Old Dust Gathering Engine I'd rather drive a Toyota, than push a ford. |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| car suddenly wont start - never ran great anyway, esp. cold, now cranks, but won't st | rjSupra | MKIII Supra | 41 | 03-21-2014 05:27 PM |
| 87 Supra won't start | RNEMESiS42 | MKIII Supra | 3 | 06-25-2011 06:30 PM |
| Stalling at start up | Green7mgte | MKIII Supra | 4 | 12-15-2009 06:31 PM |
| My car decides when it wants to start | carfanatic89 | MKIII Supra | 16 | 02-12-2008 07:50 PM |
| Car Died...where to start? | Jrew | MKIII Supra | 4 | 10-26-2007 02:19 PM |
Threaded Mode