Internals

[Travis89Turbo]

Originally Posted by itsjustsway

Where can I find the rods and pistons as a set? And I can imagine fuel cut off will be a big problem after those mods. For injectors I go to the junk yard and search threw cars, I picked up 550cc injectors but still the rest of the crucial parts. 680cc would be alot better so where do I begin to look? and for the rest of those fuel parts

You will be so far past fuel cut at those power levels your forget what it is.. if you use the EMS stinger you can adjust fuel cut to whatever you want. If you use oem ecu with a piggy back you will need hks fcd but that is not really fully adjustable pretty much has just a few settings and none of them are written in stone. But they do work great to get the job done!

I hope you know you will need a bigger turbo to make those power levels.

I really dont reccomend running junkyard injectors! Without atleast sending them out to get rebuilt and mapped! which cost almost as much as new injectors See links.

here is some links to some parts....
JE

http://cgi.ebay.com/ebaymotors/JE-Pi...Q5fAccessories


CP

http://cgi.ebay.com/ebaymotors/CP-Pi...Q5fAccessories

Cams

http://cgi.ebay.com/ebaymotors/BRIAN...item3a614a2a7f

Springs & retainers

http://cgi.ebay.com/ebaymotors/Brian...item43a056d6e1

Turbo

http://store.driftmotion.com/static/...-1turbokit.php

Ems

http://store.driftmotion.com/static/...ndaloneecu.php

Injectors
http://store.driftmotion.com/static/...ors6wclips.php

AFPR
http://store.driftmotion.com/static/i-afprkit7m-gte.php


As you can see it gets exspensive real quick.. But you gotta pay to play!
Hope this helps!