Internals

[Travis89Turbo]

Those IMO Are the best rods available. I have ran them on 3 Honda engines one over 750hp never had one break. But I might add I had the genius of honda tuning it...enough of hondas though.

Now for pistons i would go with either JE or CP. Both are about bullet proof ( with a good tune) and can be bought as a set with eagle h beam rods.

Now cams. And valvetrain. I would go with Brian crower. Prob 264 if ur gonna drive it on the street. BC cam are newer to the market compared to say comp cams or edelbrock. But BC is growing FAST and tonz of supra guys are running his cams! He tends to focus mostly on imports! He makes great springs and titanium retainers...

Dont forget the fuel system as well. Which I kno u are only asking for internal parts. But I am really bored and broke my hand yesterday so I have nothing else to do but talk. I myself am gonna go with a EMS stinger standalone computer. There again a lot of supra guys are running these so u can find a base map to get u running and then tune from there. This is the most important part! You can have the best parts in the world but with a bad tune either be slow or worse. blow something up. Not to mention you could hit 500 as a low mark and more like 600 as a high! Don't forget injectors. I'd suggest bout 680cc with Walbro 255 in tank and one inline. and of course an AFPR.


Good luck!