Does anyone know where these wires go?

cfurlan · 10-29-2010, 08:51 AM

I started putting my engine back together and came across this set of wires taped together and my label got smeared and I cannot read it. It's on the driver's side below the intake. Any help would be great, Thanks

CanadianBak'inSupra · 10-29-2010, 01:10 PM

im assuming there coming from your wiring harness that runs between upper and lower intake plenum. should just go around bolts for the upper plenum, there just grounds.

i had the same problem a few months back:
http://www.toyota-supra.info/forums/...2-starter.html

Sonyps307 · 10-29-2010, 07:48 PM

They bolt to the lower intake pipes they r the main grounds to ur ecu and starter I forgot on my build also and I put the in the wrong place and I had no spark so had to bolt them to the intake

cfurlan · 10-30-2010, 04:53 AM

Hey thanks for all your help. I will be completing the finishing touches on my motor tomorrow...trans mount, driveshaft, intake, and wiring. So I will keep everyone posted and let you guys know how my rebuild went.

10-29-2010, 08:51 AM	#1
cfurlan Intake Join Date: Oct 2010 Location: Indiana Posts: 38	Does anyone know where these wires go? I started putting my engine back together and came across this set of wires taped together and my label got smeared and I cannot read it. It's on the driver's side below the intake. Any help would be great, Thanks Attached Thumbnails

10-29-2010, 01:10 PM	#2
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	im assuming there coming from your wiring harness that runs between upper and lower intake plenum. should just go around bolts for the upper plenum, there just grounds. i had the same problem a few months back: http://www.toyota-supra.info/forums/...2-starter.html __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ignition Wires	SideWinderGX	MKIII Supra	10	07-19-2007 08:44 PM
Spark plugs & WIRES	HEMAN	MKIII Supra	2	11-03-2006 05:31 AM
Igniter Wires	PORADA2005	MKIII Supra	0	05-01-2006 08:18 PM
spark plug wires	kewlcoconut	MKIII Supra	2	03-19-2006 07:45 AM
loose wires	87supraturbo19	MKIII Supra	10	01-19-2006 05:51 PM

10-29-2010, 07:48 PM	#3
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	They bolt to the lower intake pipes they r the main grounds to ur ecu and starter I forgot on my build also and I put the in the wrong place and I had no spark so had to bolt them to the intake

10-30-2010, 04:53 AM	#4
cfurlan Intake Join Date: Oct 2010 Location: Indiana Posts: 38	Hey thanks for all your help. I will be completing the finishing touches on my motor tomorrow...trans mount, driveshaft, intake, and wiring. So I will keep everyone posted and let you guys know how my rebuild went.