Car wont turn over after swap!

Conga1991 · 10-06-2010, 03:55 AM

Where would the ground be for the steering column?

also does the cam position sensor have to be timed? from what I was told you just put it in and make sure the bolt that holds it is in the middle??

btwilson86 · 10-06-2010, 04:04 AM

Quote:

Originally Posted by Conga1991

does the cam position sensor have to be timed? from what I was told you just put it in and make sure the bolt that holds it is in the middle??

Yes, you have to time the CPS. No, you can't just drop it in. You have to line the gear up with the mark on the CPS, when you install it you have to compensate for the several degrees the whole thing is going to turn. Here is a link to the TSRM on how to PROPERLY install the CPS. Be sure you follow that last step (setting the ignition timing).

Conga1991 · 10-20-2010, 12:10 AM

So I finaly got to it today, tried the ignition timing and still nothing!

Any oter suggestions?? if not, time to call a mechanic.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7mgte swap vs 1jz swap	Supra Saiyan	MKIII Supra	15	04-24-2012 02:58 AM
headlights wont turn off after swap	89supra884	MKIII Supra	7	04-19-2010 03:24 AM
1JZGTE swap question	supradaddy0803	MKIII Supra	1	04-12-2007 04:56 PM
NA->T swap and convertion questions	5+4=9	MKIII Supra	6	03-02-2006 02:11 AM

10-06-2010, 03:55 AM	#1
Conga1991 3" Exhaust Join Date: Jun 2009 Location: Avondale, AZ Posts: 169	Where would the ground be for the steering column? also does the cam position sensor have to be timed? from what I was told you just put it in and make sure the bolt that holds it is in the middle??

10-20-2010, 12:10 AM	#3
Conga1991 3" Exhaust Join Date: Jun 2009 Location: Avondale, AZ Posts: 169	So I finaly got to it today, tried the ignition timing and still nothing! Any oter suggestions?? if not, time to call a mechanic.