|
|
07-24-2010, 04:52 PM
|
#1 |
|
Super Moderator
Join Date: May 2007
Location: Billings, Montana
Posts: 1,034
 |
I've read on here about a year ago that the bolt holes aren't quite in the same spot between the 2 bumpers, and that some mild modification would be needed...
I'll see if I can pull up the thread I read that in when I get back from work tonight
__________________
1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels |
|
|
|
07-24-2010, 07:10 PM
|
#2 | |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
 |
Quote:
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
|
|
|
07-24-2010, 09:00 PM
|
#3 |
|
Super Moderator
Join Date: May 2007
Location: Billings, Montana
Posts: 1,034
|
And here's a link that should provide adequate information on major differences between the two bumpers.
__________________
1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels |
|
|
|
|
07-25-2010, 12:30 AM
|
#4 |
|
Stock
Join Date: Mar 2008
Location: tallahassee
Posts: 4
|
Awesome. yeah i snagged the nose piece already, going back ot get the front supports If there is a thread somewhere of a how to new bumper to old one that would be awesome, i figured i would have .to drill a couple holes at least. Definitely didn't think it was gonna be that much of a pain in the.... just to get the bumper off. Will put some pictures up as im putting mine back together
|
|
|
|
|
07-25-2010, 05:27 PM
|
#5 |
|
Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
|
Pulling the bumper isn't bad at all if you pull it all as one unit... pulling the bumper cover by itself is more work.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> |
|
|
|
|
07-25-2010, 10:59 PM
|
#6 |
|
Stock
Join Date: Mar 2008
Location: tallahassee
Posts: 4
|
yeah i got just the cover probably...
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dream Offer | Karma_Supra | MKIV Supra | 22 | 10-17-2007 03:04 PM |
Hybrid Mode
