|
|
|
|
#1 | |
|
Intake
Join Date: Apr 2010
Location: Castleton, VT
Posts: 31
![]() |
Quote:
If you're worried about gas mileage. Check for leaking injectors, bad mass air, etc...etc...etc....Leave stuff alone and fix what is wrong. And why would the first thing you would think to go to is the timing. To get shitty gas mileage your timing would have to be REALLY f-ed up.
__________________
1987 Supra Turbo Targa Blue 5spd 175K, 3" Exhaust from Turbo back, Lowered 1.5", 89 Steering Wheel and Climate Control, JDM Power Folding Mirrors, HKS Fan Controller, Greddy Turbo Timer, HKS EVCIII Boost Controller, Boost Gauge, Deleted Boost Gauge in Cluster for Volt, MKIV Non-Turbo wheels 1987 Supra N/A Coupe Blue Auto - Parts Car 1987 Supra Turbo Coupe Black 5spd - Bought with a spun bearing - RIP 1987 VW Jetta GTI Auto 89k |
|
|
|
|
|
|
#2 |
|
Supra Forum Moderator
Join Date: Nov 2009
Location: Green-Ohio
Posts: 1,297
![]() |
personally I would of taken the 200 for the safc 2 and the 200 for the wideband and bought my self something pretty. instead of doing pointless mods.
but hey, to each their own.
__________________
92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines : |
|
|
|
|
|
#3 | |
|
3" Exhaust
Join Date: Apr 2010
Location: sarasota fl
Posts: 194
![]() |
Quote:
also i couldnt think of anything pretty to spend some cash on and every bit helps as far as mods when you drive a slow na after driving FAST turbo cars all day you just want every little drop out of it but it will be turbo soon enough and i figured when i go turbo ill already have a wideband and wont need to worry about it at that point just driving the crap out of it now hoping it blows so i have real reason to spend the cash on a gte and i wont get bitched at about wasting money on my car by everyone i know
__________________
92 miata 7mgte swap forged pistons,studded mhg, 3 inch dp with a glass pack,blowthrough MAF-T,550cc inj, act stage 2 clutch, fmic kit, greddy rs, full wire tuck, rx7 lsd rear with 4.10s. 15psi "ct26-A"??(waiting on dyno #s) if anyone knows whats up with my turbo let me know it has a larger comp wheel nicer machining and 6 dual fins rather than 5? its confusing and keep finding too much contradicting info. would LLLLLOOOOOOOOVVVVVVVEEEEE a compressor map
Last edited by turbonicsperformance; 05-27-2010 at 02:27 AM. |
|
|
|
|
|
|
#4 | |
|
3" Exhaust
Join Date: Apr 2010
Location: sarasota fl
Posts: 194
![]() |
Quote:
and ive gone through and checked and double checked everything before i even started driving it though today i built my new intake and wrapped my exhaust to prevent atleast a little heat soak (seems to be helping) now at wot im running 13.6-12.5 loads better but still a little rich it should be around 14.0 at least i was shooting for 14.5-14.7 area right where its supposed to be but you can't always be perfect also today i found that this is not the original engine for my car when i pulled the heat shield off the manifold right there on the block is some paint markings form either a scrapyard or online company fun fun
__________________
92 miata 7mgte swap forged pistons,studded mhg, 3 inch dp with a glass pack,blowthrough MAF-T,550cc inj, act stage 2 clutch, fmic kit, greddy rs, full wire tuck, rx7 lsd rear with 4.10s. 15psi "ct26-A"??(waiting on dyno #s) if anyone knows whats up with my turbo let me know it has a larger comp wheel nicer machining and 6 dual fins rather than 5? its confusing and keep finding too much contradicting info. would LLLLLOOOOOOOOVVVVVVVEEEEE a compressor map
|
|
|
|
|
![]() |
|
|