oxygen sensor questions

cre · 12-20-2009, 08:23 AM

I killed a WB sensor by placing to too close to the manifold on my N/A. A lot of people have no problem placing their WB in the elbow after the turbo though. You definitely want it before the cat, as close to the header as possible without it getting too hot. From asking around it's very common to place it in the downpipe right after it bends under the firewall (that's where mine was on my N/A setup and where it is on my turbo setup).

As for replacing the stock sensor or adding another... depends entirely on how you're setting up and tuning the car. Some setups require both, some require only the wideband, and others can use the wideband to supply a stock NB signal to the ECU. For your purposes you may replace the stock NB sensor with the WB and program one of the LC-1's (or whatever WB you go with, as long as it has programmable outputs or a NB output) to supply a NB signal to one of the two analog outputs and the other will supply a WB signal to the gauge.

12-20-2009, 08:23 AM	#8
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I killed a WB sensor by placing to too close to the manifold on my N/A. A lot of people have no problem placing their WB in the elbow after the turbo though. You definitely want it before the cat, as close to the header as possible without it getting too hot. From asking around it's very common to place it in the downpipe right after it bends under the firewall (that's where mine was on my N/A setup and where it is on my turbo setup). As for replacing the stock sensor or adding another... depends entirely on how you're setting up and tuning the car. Some setups require both, some require only the wideband, and others can use the wideband to supply a stock NB signal to the ECU. For your purposes you may replace the stock NB sensor with the WB and program one of the LC-1's (or whatever WB you go with, as long as it has programmable outputs or a NB output) to supply a NB signal to one of the two analog outputs and the other will supply a WB signal to the gauge. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oxygen Sensor Help	suprajim	MKIII Supra	4	10-15-2009 10:21 PM
oxygen sensor 82 supra	amigo	MKII Supra	0	12-13-2008 03:28 PM
Oxygen sensor -wideband or narrowband?	azerty	MKIII Supra	1	05-06-2008 01:48 PM
sub oxygen sensor	sd88supra	MKIII Supra	4	04-13-2007 01:20 PM
oxygen sensor	burton51m	MKIII Supra	34	04-01-2007 08:07 AM