new intercooler

west_side_supra · 11-18-2007, 07:17 PM

see the way i'm thinking of running my 3 inch pipes is from the TB go out straight then do a 90 around the tems, then straight through the bigger hole in front of the air filter then go down into the ic inlet, as for the turbo side, do a 180 or 2 90's go under the radiator then a little straight piece then another 90 then straight with another 90 going up into the turbo. i dont know if there is a way to go under the oil pan but that was another way i was thinkin of doing it. mmm as for the turbo question its a Gt46 : Compressor Wheel - .66 A/R, 48.9 trim Turbine Wheel - 1.05 A/R, 61.9 trim 4.25" inlet, 3.38" outlet T4 flange with V-band i never really got a name for the turbo, but thats what i had hunted down with all of those specs, and i know in the manual it says something like super hybrid, i'm curious how it will spool up

11-18-2007, 07:17 PM	#9
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	see the way i'm thinking of running my 3 inch pipes is from the TB go out straight then do a 90 around the tems, then straight through the bigger hole in front of the air filter then go down into the ic inlet, as for the turbo side, do a 180 or 2 90's go under the radiator then a little straight piece then another 90 then straight with another 90 going up into the turbo. i dont know if there is a way to go under the oil pan but that was another way i was thinkin of doing it. mmm as for the turbo question its a Gt46 : Compressor Wheel - .66 A/R, 48.9 trim Turbine Wheel - 1.05 A/R, 61.9 trim 4.25" inlet, 3.38" outlet T4 flange with V-band i never really got a name for the turbo, but thats what i had hunted down with all of those specs, and i know in the manual it says something like super hybrid, i'm curious how it will spool up __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR Last edited by west_side_supra; 11-18-2007 at 07:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ma70 intercooler	SCRAMJET	MKIII Supra	1	02-17-2009 01:08 PM
Clean out your intercooler!!	IHateHacks	MKIII Supra	4	10-25-2007 08:33 AM
Intercooler restriction?	gomezmk	MKIII Supra	0	03-03-2007 02:11 AM
intercooler pipes locations	RussianMK3	MKIII Supra	1	12-07-2006 04:33 PM
Which Aftermarket Turbo? Intercooler?	RoLLiN	MKIII Supra	1	06-10-2006 06:57 AM