05-05-2012, 04:36 AM
|
#1 |
|
Stock
Join Date: Apr 2012
Location: Port Charlotte, FL
Posts: 24
 |
Low idoling missing.
At about 500 to 600 rpms, it sounds like it is missing. It stall every now and then.
I replace the air filter that is when it started. I notice my plastic intake from the air filter box to the throttle body, some are cracked. Also I am have problems of overheating, I thought it was a head gasket but no water in the oil, no oil in the antifreeze, no white smoke or water out the tail pipe. Any suggestions? |
|
|
|
05-08-2012, 03:37 PM
|
#2 |
|
Official hall monitor / search nazi - NO SOUP FOR YOU!
Join Date: Oct 2009
Location: Canada, BC
Posts: 837
|
check your intake piping for leaks as well as vacuum lines. it would not hurt to throw a timing light on it.
http://www.cygnusx1.net/Supra/Librar...aspx?S=IG&P=10
__________________
1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft. |
|
|
|
|
05-08-2012, 05:55 PM
|
#3 |
|
Stock
Join Date: Apr 2012
Location: Port Charlotte, FL
Posts: 24
|
Ok, Now what
My plastic intake is cracked and brittle.
Any idea of how to fix it or try to find a use ones? |
|
|
|
|
05-10-2012, 01:48 AM
|
#4 | |
|
Official hall monitor / search nazi - NO SOUP FOR YOU!
Join Date: Oct 2009
Location: Canada, BC
Posts: 837
|
Quote:
other than that black electrical tape and proper hose clamps to extend life.
__________________
1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft. |
|
|
|
|
|
05-11-2012, 12:08 AM
|
#5 |
|
Bone Stock w Upgrades ;-)
Join Date: Apr 2010
Location: Tampa Bay
Posts: 214
|
Try ebay or your local craigs list for a part out. The toyota number for the Turbo Accordian Hose (AFM to Turbo Housing) is 17882-42012 if yours is a turbo. You can use black silicone as a temporary fix once things are in place. May rip again on removal. Let it cure before starting. Silicone can dammage the O2 sensor.
Last edited by Bru; 05-11-2012 at 12:17 AM. |
|
|
|
|
05-11-2012, 02:10 AM
|
#6 |
|
Official hall monitor / search nazi - NO SOUP FOR YOU!
Join Date: Oct 2009
Location: Canada, BC
Posts: 837
|
you should really fill in your sig. or user CP so we know what kind of engine you are running...
__________________
1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft. |
|
|
|
|
05-26-2012, 08:45 AM
|
#7 |
|
Stock
Join Date: Apr 2012
Location: Port Charlotte, FL
Posts: 24
|
How do I know what engine I have.
All I know for the moment it is a 1986 (not a 1986-1/2) supra with a stock engine.
|
|
|
|
|
05-30-2012, 03:20 AM
|
#8 |
|
Official hall monitor / search nazi - NO SOUP FOR YOU!
Join Date: Oct 2009
Location: Canada, BC
Posts: 837
|
any luck with finding new piping??? santa may have some...
__________________
1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft. |
|
|
|
|
06-07-2012, 04:08 AM
|
#9 |
|
3" Exhaust
|
ya mine idles low as well but I think I found my problem:
My whole intake system looked like that! plus my ignition system is in desperate need of maintenance, so that's another place to check out for your problem.
__________________
Officially joined the V-Dub club 
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| doing a 7mgte swap.. can you tell me what im missing? LOL | ochowdero | MKIII Supra | 9 | 02-16-2012 07:33 PM |
| 89 supra turbo missing after warm | Rob1 | MKIII Supra | 10 | 02-15-2011 03:55 AM |
| Missing VIN from 1989 MKIII | SupraSleuth | Non-Generation Specific Questions | 8 | 09-14-2008 08:57 PM |
| engine is missing and fluttering | tonystarks | MKIII Supra | 5 | 06-08-2006 06:28 PM |
| Missing Fuse?? | kewlcoconut | MKIII Supra | 7 | 10-17-2005 02:29 PM |
Linear Mode
