Casey's RHD Swap/Build

[Moonraker]

Originally Posted by Isphius

Haha, yes they are mucho heavy. 7m-ge and 5 speed is heavier than my monte carlos 305 with aluminum heads on it and 200-4r trans. The reason is the straight 6 block has to have more material on it by design. On a v8, the oil pan and intake manifold ,which are aluminum and sheet metal, make up a lot of the surface area that the straight 6 has to cover. Plus its longer and taller and about the same width, Both motors being completley disassembled.

Thats why that "taller, longer mucho heavy" 7M-GE is so smooth.
On another note. If you haven't already shaved and finished your rear wiper you'll need to weld up the old hole. If you try to just fiberglass it you will find with time that it will shrink and leave you with a nasty cracked decklid. 35 years in the body business...I know what I'm talking about. I made a few mistakes over those years lol.

[Isphius]

I welded a patch over mine and just bondoed it. It came out ok. And, they could have at least made the block out of aluminum or something. Thats so much weight for just a 3 liter engine.

[dcrusupra]

Umm, update....

New car. 88 N/A Targa.
Bought it for $500 plus $80 to get it towed. It has a blown headgasket. So the engine will come out sometime soon. It also needs a new dashboard. So if anyone has a grey one for sale, I will be looking for one soon. After I buy one of Weez's wings for the targa.

[Isphius]

I think thats my old car. lol. Maybe the guy drove it to florida and blew the headgasket. Mine def needed a new dash and a new HG lol. But nah jk it couldnt be y old supra, no targa top.

[dcrusupra]

Complete change of pace....

My last build turned out to be hopeless. The body of the car was useless to me, it required too much bodywork and too much bondo. So i found a car that better suited my needs.



I got new window louvers so the ugly faded ones will be replaced by brand new shiny ones.



Body kit
Shineauto Gracer front bumper
Bomex sideskirts
Bomex rears - just bought
89+ taillights
89+ molding
Sunshade - just bought
Turn Signal Covers - just bought
Ruff Racing R280 Rims 18x9.5 rear 18x8.5 front

I just got the turbo engine and tranny

It was all going good, I was buying a new item every week. Then I got fired for a BS reason, so i cant buy anything else until i find a new job. I was just about to buy the rest of the body kit also. It sucks.

I also jumped in on a TRD shift knob group buy. I got the knob in like 4 days. It kinda scared me because there was no confirmation of a recieved payment.

Here is the new engine after some cleanup




a new intercooler i cant use yet, i need a bigger turbo. 24x12x3 without end tanks, 3" inlet/outlets.


Saved some items from the last car that I was going to use. The LIPP high flow fuel rail and the aeromotive fuel pressure regulator.



A list of upgrades that I'll be buying after i get a new job and the rest of the body kit:

Forged JE pistons, .20 over
Pauter Rods
FFIM w/ Q45 TB
+1mm full Ferrea valve train
JT70 turbo
Tial BOV
680CC RC Injectors
Aeromotive A1000 fuel pump
3" Cooleze downpipe
3" exhaust
C's short shifter
Jaws Gear aluminum 1 pc. driveshaft

I haven't decided which clutch I'll use yet, i was looking at the clutchmasters stage 3, but i dont really want a harsh engagement. I'm not sure if I'll get a lightened flywheel either.

As of right now, I'll put the engine in with the W58 instead of the R154 because I don't have a driveshaft for the R154. I was going to buy the Jaws Gear one but i got fired the day I was going to order it. The W58 has an upgraded clutch so it should be fine for a bit. The engine will stay stock for a little while so I can just get used to driving the car again, it's been 2 years since I've driven a Supra lol.

And after a long time of searching for some nice black rims with a chrome lip i finally settled on some rims. The Ruff Racing R280s. 18x9.5 and 18x8.5 +35 offsets for front and rear.

Picture of said rims....

I'm still doing the black with red accents theme. I got an 89+ climate control with red LEDs in it, and I put red LEDs in the gauge cluster. I just need to work on the interior again.

And thats about it, I'll post pics of some little things as I go along. As soon as I can find a place I can use to swap the engines, I'll post some more pics. And sorry about the disorganized post. Lol.

[Rice1337]

The car is coming together pretty nicely so far. The Supra by itself was only around 600$, but let's see how much the car costs altogether after you fix it all up. You have to tell me.

[dcrusupra]

New pics...
These are the smoked turn signal covers and the TRD shift knob


A couple of close ups of the knob



And this is the sunshade and Bomex rears


I have $1k coming in from my tax return. And then about $500 more in late April. I'm still trying to decide what I'm going to buy.

I'm probably going to get some 2.5" intercooler piping, Bomex sideskirts, stock accordian hose, and a boost controller. And then in April I'll probably buy a front face intake manifold.

In the mean time, I towed my car to where my parents work and the owner of the place said I can do the swap in the parking lot.

Before:

After:


I have a write-up on how to remove a 7M-GE on my CarDomain, but the engine was a Cressida engine, so it is probably a little different but not enough that it will give you problems.