Couple of updates...
New door lock bezels straight from Toyota, along with the slave cylinder hardline I bent the hell out of putting the engine in. http://memimage.cardomain.net/member...23_57_full.jpg Brand new accordian hose from Horse Power Freaks http://memimage.cardomain.net/member...23_56_full.jpg I will have more pics of the other things i'm getting on Friday night. |
New parts from Driftmotion!
New Aisin Slave Cylinder http://memimage.cardomain.net/member...23_58_full.jpg 2.5" IC pipes with a TiAL BOV adapter with two 2.5" to 2.25" couplers http://memimage.cardomain.net/member...23_59_full.jpg On Tuesday next week I'll be getting my TiAL BOV. I need a driveshaft. I found one in Miami but the guy wants $150 and I'm not looking to spend that much. But if I can't find one soon I'll give in and go buy it. I'll put the intercooler and the piping on tomorrow if it doesn't rain. |
I bought a few new parts. I have 89+ tail lights and a drive shaft coming to me. I'm having some trouble putting the intercooler pipes in, lol. But I'll get it eventually.
A couple of parts.... A used Stewart Warner Boost Gauge http://i123.photobucket.com/albums/o...Picture154.jpg And a new TiAL 50mm BOV http://i123.photobucket.com/albums/o...Picture155.jpghttp://i123.photobucket.com/albums/o...Picture156.jpg http://i123.photobucket.com/albums/o...Picture156.jpg |
Another new part http://www.supramania.com/forums/ima...on_biggrin.gif Adjustable Fidanza Cam Gears
http://memimage.cardomain.net/member...23_62_full.jpg I put the new slave cylinder and hardline in earlier today and replaced the broken ISC hose with a piece of 5/8" heater hose because i broke it by accident. I also installed the boost gauge. I just shoved it into the ashtray slot for now. So now all thats left is hooking up the IC piping and the driveshaft. And then it's on the road. |
man you're on a roll
|
Lol. I'm about done with this roll. I just have a couple more things coming. A driveshaft and 89+ tails. Now it's just a waiting game until something breaks or blows. Only a MKIII Supra owner would say that. :) Which is when I'll start my rebuild. Then I'll be on another more expensive roll in which each part will cost $500+. Lol
|
Ok, well I got all the intercooler piping on, the blow off valve hooked up, the driveshaft on, and fluid in the transmission. I went to hook up the clutch and realized I had to get a new rubber hose that is a Toyota only part. So that ended my fun because I swore to myself that today would be the day it drove. So now all I do is sit in the car, rev it, and pretending like I'm driving. It's sad. :3d_frown: . I had to buy a new battery also cuz my last one was dead. On another note, I got all my dash lights working. It was the stupid dimmer switch. I had an extra one laying around. Although I could've sworn I changed it. It looks pretty bad ass at night with all red. I'll take a pic and post it here.
I guess I hooked up my boost gauge wrong because it's not reading boost. I'll fix that another day tho. |
As far as your boost gauge, I see that it is only a boost gauge not a combination vacuum/boost. You will not make any boost revving the engine in neutral.
I'm just curious, but what rubber hose are you talking about that has to do with the clutch? |
It's the last rubber hose coming from the clutch master cylinder. It attaches to the hard line that goes to the slave cylinder. It's a simple fix but dammit i wanted the car on the road already. And now i have to wait until friday. I need to get my daily driver to the dealer for some repairs under warranty.
|
Well, tomorrow I should get the short rubber clutch line tomorrow. And if I do, I'll definitely have the car on the road. A couple more pics.
Red dash LEDs. Some of the lights look dim but I can assure you they are all mighty bright. But like some have said, you can't see where the redline starts. O well. We all know where it is anyway, lol. And the picture makes some of the climate control lights look orangish but they are red also. http://i123.photobucket.com/albums/o...Picture168.jpg And a picture of the upper intercooler pipes and TiAL BOV. Since I didn't hook up the power steering I took out the reservoir. http://i123.photobucket.com/albums/o...Picture167.jpg |
All times are GMT. The time now is 04:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.