someone help

ryan20 · 09-23-2006, 07:33 AM

i juss had mt supra engine rebuilt it ran when praked tryed to start and no spark i think the guy who rebuilt spliced the wires going to the coils theres four wires out of the back of hte plug there is 4 wires one wire is spliced to go to evry coil while the other three go to seperate coils and i tested the woltage at each seperate plug and there is no more than 6 volts and the book says there suppose to be 12 somone help if u can

suprra_girl · 10-01-2006, 05:13 AM

7mgte i assume?

if so make sure all wires have a good connection, you have good grounds
see if you can score another wiring loom for the coils (the part that plugs into the coils itself)
do a diagnostic to make sure the ecu hasn't picked up anything else

09-23-2006, 07:33 AM	#1
ryan20 Stock Join Date: Sep 2006 Location: ny Posts: 2	someone help i juss had mt supra engine rebuilt it ran when praked tryed to start and no spark i think the guy who rebuilt spliced the wires going to the coils theres four wires out of the back of hte plug there is 4 wires one wire is spliced to go to evry coil while the other three go to seperate coils and i tested the woltage at each seperate plug and there is no more than 6 volts and the book says there suppose to be 12 somone help if u can

10-01-2006, 05:13 AM	#2
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	7mgte i assume? if so make sure all wires have a good connection, you have good grounds see if you can score another wiring loom for the coils (the part that plugs into the coils itself) do a diagnostic to make sure the ecu hasn't picked up anything else __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!