??????New Clutch SLIPPING!!!!!!

revolution · 11-23-2005, 07:13 PM

did you have the flywheel turned? if not it can cause very uneven wear, but never heard of it that early.

mrnickleye · 11-24-2005, 12:01 AM

My guess is: The slave cyl. is out of adjustment, and is not letting the pressure plate engage fully. Adjust the clutch per this

http://www.cygnusx1.net/supra/librar.../cl/CL_03.html

and read entire section to see if it helps give you some answers.

MKIIISupraTurbo · 11-24-2005, 08:38 PM

Well, thaks alot man!.....I'll try that when I get back on my feet again!......If I had to guess, you're probably right!........
Thanks, Matt!!!

11-23-2005, 07:13 PM	#1
revolution Stock Join Date: Nov 2005 Location: ohio Posts: 20	did you have the flywheel turned? if not it can cause very uneven wear, but never heard of it that early. __________________ love my chev but it hates me

11-24-2005, 08:38 PM	#3
MKIIISupraTurbo Stock Join Date: Nov 2005 Posts: 4	Thanks! Well, thaks alot man!.....I'll try that when I get back on my feet again!......If I had to guess, you're probably right!........ Thanks, Matt!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch help please...	98fxdwg	Non-Generation Specific Questions	0	09-28-2007 06:03 AM
Slipping clutch blues...	Supra chick's dad	Non-Generation Specific Questions	4	08-20-2007 02:34 PM
slipping clutch	kshuping	MKIII Supra	2	05-24-2007 03:09 AM
Slipping Clutch	mrvetten	Non-Generation Specific Questions	8	07-07-2005 07:19 PM

11-24-2005, 12:01 AM	#2
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	My guess is: The slave cyl. is out of adjustment, and is not letting the pressure plate engage fully. Adjust the clutch per this http://www.cygnusx1.net/supra/librar.../cl/CL_03.html and read entire section to see if it helps give you some answers.