Is new head gasket a must?

lethalwithasupra · 09-28-2005, 08:14 AM

me ? yea its together, and the boss might have thrown the gasket out. i was going to frame it and the one i crimped when it went together the first time and hang them both on my wall.

suprra_girl · 09-28-2005, 12:11 PM

i would say machining was not up to scratch for the mhg

just at a guess

lethalwithasupra · 09-30-2005, 08:14 AM

half the gaskets on the manifolds were so old they splintered taking them off. don't know if thats a good thing but when i saw it i smiled.

65 alright as a torque setting ? 58 was recomended, so we went a little higher.

SupraMan1784 · 09-30-2005, 12:51 PM

thats a badd thing if they splintered coming off...they musta taken a beating over the years

mrnickleye · 09-30-2005, 11:42 PM

72 lb ft of torque is what everyone recommends for the head bolts. You DID use new bolts, didn't you !!??!! Hell, only $46 fron dealer. Where did you get your gasket set??? Only $155 online, 2 day mail, no shipping or tax, Ishino Toyota factory oem. You are replacing all the hoses, right??

lethalwithasupra · 10-01-2005, 11:32 AM

... hey scruffboy, just don't do it. i spent a totally uncool amount of time doing it ( although it reallllyyy did need to be done ), and then i got into all the cool little gasket replacements that weren't in the head set, then there's the problem of things that just dont want to go back on properly. and still leak ...

paid about $ 300 for a head gasket set.
what is it with the head bolts ? half the people tell me they are torque to yeild and they stretch after the first use so must be replaced. and the other half tell me not to worry but retorque them after 10000 km.

suprra_girl · 10-01-2005, 01:21 PM

yeps 72 for new stock head bolts & arp head bolts... 82ft lbs for arp head studs

normally for stock gaskets etc... i torque bolts to 72 then after 1000km i retorque... but generally i have found they don't move... maybe you could retorque at 5000km but i think ur better off leaving it alone

my 2c worth

09-28-2005, 08:14 AM	#1
lethalwithasupra 3" Exhaust Join Date: Sep 2005 Location: south cantebury Posts: 112	me ? yea its together, and the boss might have thrown the gasket out. i was going to frame it and the one i crimped when it went together the first time and hang them both on my wall. __________________ So I bought this old Honda bike, an NSR250. Bit of a street racer, I guess. I'm told they're fast. Delivering it home with a friend driving the Supra for the first time. I drop gears and make a scream from the twin pipes flowing down this pony's flanks and it takes off like it's tail's on fire. I look back when the Honda gets to its tap-out and the Supra's only two lengths behind. No one I've let ride my bike has told me its slow, they've all loved the thing. That car is a good thing indeed.

09-28-2005, 12:11 PM	#2
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	i would say machining was not up to scratch for the mhg just at a guess __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

09-30-2005, 08:14 AM	#3
lethalwithasupra 3" Exhaust Join Date: Sep 2005 Location: south cantebury Posts: 112	half the gaskets on the manifolds were so old they splintered taking them off. don't know if thats a good thing but when i saw it i smiled. 65 alright as a torque setting ? 58 was recomended, so we went a little higher. __________________ So I bought this old Honda bike, an NSR250. Bit of a street racer, I guess. I'm told they're fast. Delivering it home with a friend driving the Supra for the first time. I drop gears and make a scream from the twin pipes flowing down this pony's flanks and it takes off like it's tail's on fire. I look back when the Honda gets to its tap-out and the Supra's only two lengths behind. No one I've let ride my bike has told me its slow, they've all loved the thing. That car is a good thing indeed.

09-30-2005, 12:51 PM	#4
SupraMan1784 SP58GT Join Date: Jun 2005 Location: Dirty Jerz Posts: 691	thats a badd thing if they splintered coming off...they musta taken a beating over the years __________________ Now: Saving for an MKIV Broken Rides: (Sold) 91 supra turbo 5speed with a 1jzgte motor 421whp 400(399) ft*lbs of torque on tap @ 15 psi "Always outnumbered, never outgunned."

10-01-2005, 11:32 AM	#6
lethalwithasupra 3" Exhaust Join Date: Sep 2005 Location: south cantebury Posts: 112	... hey scruffboy, just don't do it. i spent a totally uncool amount of time doing it ( although it reallllyyy did need to be done ), and then i got into all the cool little gasket replacements that weren't in the head set, then there's the problem of things that just dont want to go back on properly. and still leak ... paid about $ 300 for a head gasket set. what is it with the head bolts ? half the people tell me they are torque to yeild and they stretch after the first use so must be replaced. and the other half tell me not to worry but retorque them after 10000 km. __________________ So I bought this old Honda bike, an NSR250. Bit of a street racer, I guess. I'm told they're fast. Delivering it home with a friend driving the Supra for the first time. I drop gears and make a scream from the twin pipes flowing down this pony's flanks and it takes off like it's tail's on fire. I look back when the Honda gets to its tap-out and the Supra's only two lengths behind. No one I've let ride my bike has told me its slow, they've all loved the thing. That car is a good thing indeed.

09-30-2005, 11:42 PM	#5
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	72 lb ft of torque is what everyone recommends for the head bolts. You DID use new bolts, didn't you !!??!! Hell, only $46 fron dealer. Where did you get your gasket set??? Only $155 online, 2 day mail, no shipping or tax, Ishino Toyota factory oem. You are replacing all the hoses, right??

10-01-2005, 01:21 PM	#7
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	yeps 72 for new stock head bolts & arp head bolts... 82ft lbs for arp head studs normally for stock gaskets etc... i torque bolts to 72 then after 1000km i retorque... but generally i have found they don't move... maybe you could retorque at 5000km but i think ur better off leaving it alone my 2c worth __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown Head Gasket Snake Oil	unkymurch	Non-Generation Specific Questions	21	08-06-2010 02:11 AM
1989 Supra blown head gasket	rayk5799	Non-Generation Specific Questions	6	05-18-2009 10:51 AM
Head Gasket replacement questions.	DavidLeClair584	MKIII Supra	1	06-09-2007 09:17 PM
Buying a 87, head gasket questions	Gengus	MKIII Supra	1	04-14-2007 07:15 PM
Head Gasket Part II	Bullz_EyE	MKIII Supra	2	01-26-2006 06:30 PM