1st gear jumping out, 4th gear crunching, how do I fix it without changing gearbox

wcrispino · 01-28-2010, 11:24 PM

Quote:

Originally Posted by gteduck

where the shifter enters the gearbox there is a alloy plate roughly 6 inch's long ( 150mm ) mine is located at the rear of this plate ( mark2 ) the other version , somtimes called 'short shifter' is located in the middle of the plate. I'm not sure what yours is ! 93 mark4 is it?
i got a really freash box for 675 bucks, i did look around but there not as cheap as a few years ago. i had to move the shifter back, but it was no real trouble. i just noticed you in oz, what state ? i'm in victoria, maybe i can help? all you need is 14mm open end or ring spanner (if memory serves me correctly ),rtv sealant and a little shifter or 10,12 mm spanner. sockets are best for the job if you have them? ring around and get a quote on price for box !

Im in sydney so I don't know how I can get the box from victoria. Do you think I can get it couriered? The box you have would it fit mine. Its a 93 so yeah i think its a mark 4. Thanks for the info.

gteduck · 01-31-2010, 11:13 AM

I think you misunderstood me , the box i got is in my car as a friend did me the courtesy of blowing the one i had in it ,it was 20 years old thou. That's why i looked around for one . Just ring a few transmission places and ask for a box . they generally have fairly new one's they import ,not old crappy ones . check out the picture i mentioned in earlier post ,it shows the different shifter positions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Auto to Manual transmission?	dannydavi	MKIII Supra	19	05-18-2007 05:33 AM
changing gear oil	Levi1717	MKIII Supra	10	01-08-2007 03:34 AM
changing out ring gear	Burn N' Up	MKIII Supra	0	08-30-2006 07:09 PM

01-31-2010, 11:13 AM	#2
gteduck Intake Join Date: Jan 2010 Location: melbourne,australia Posts: 31	I think you misunderstood me , the box i got is in my car as a friend did me the courtesy of blowing the one i had in it ,it was 20 years old thou. That's why i looked around for one . Just ring a few transmission places and ask for a box . they generally have fairly new one's they import ,not old crappy ones . check out the picture i mentioned in earlier post ,it shows the different shifter positions.