Exhaust Head Smoke

7mlove88 · 07-13-2009, 09:01 PM

I just checked that out and the O-ring on the CPS is not damaged and looks fine..but the plastic cover of the CPS and the plastic gasket within is cracked and completely destroyed...so despite the 0-ring retaining the oil within the sensor could that plastic cover & gasket be the problem?

Beals · 07-14-2009, 03:01 AM

Quote:

Originally Posted by 7mlove88

I just checked that out and the O-ring on the CPS is not damaged and looks fine..but the plastic cover of the CPS and the plastic gasket within is cracked and completely destroyed...so despite the 0-ring retaining the oil within the sensor could that plastic cover & gasket be the problem?

yeah you probably have to replace the gasket. And check the hoses if theirs any split it'll need replacing, I've had to replace numerous ones.

7mlove88 · 07-15-2009, 01:20 AM

So i replaced the cover and the gasket and when I replaced everything the car would not start..turns out I forgot to mark the position of the CPS..would it be alright to just rea-align the holes from the Dowel pin?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
White smoke from exhaust manifold	Rommy	MKIII Supra	15	07-26-2009 06:32 PM
replacing the head and headgasket	skadaloz	MKIII Supra	4	04-13-2009 11:54 PM
Fel-Pro Head Gasket for Stock 1990 Turbo Engine	Benesesso	MKIII Supra	5	03-10-2006 10:52 PM
smoke out the exhaust	wang10	MKIII Supra	5	04-27-2005 03:19 PM

07-13-2009, 09:01 PM	#1
7mlove88 Stock Join Date: Jun 2009 Location: Arizona Posts: 3	I just checked that out and the O-ring on the CPS is not damaged and looks fine..but the plastic cover of the CPS and the plastic gasket within is cracked and completely destroyed...so despite the 0-ring retaining the oil within the sensor could that plastic cover & gasket be the problem?

07-15-2009, 01:20 AM	#3
7mlove88 Stock Join Date: Jun 2009 Location: Arizona Posts: 3	So i replaced the cover and the gasket and when I replaced everything the car would not start..turns out I forgot to mark the position of the CPS..would it be alright to just rea-align the holes from the Dowel pin?