Toyota Supra Forums! Join the Supra forum!

Toyota Supra Forums! Join the Supra forum! (http://www.toyota-supra.info/forums/)
-   Non-Generation Specific Questions (http://www.toyota-supra.info/forums/non-generation-specific-questions/)
-   -   Exhaust Head Smoke (http://www.toyota-supra.info/forums/non-generation-specific-questions/14276-exhaust-head-smoke.html)

7mlove88 06-29-2009 12:14 AM

Exhaust Head Smoke
 
I have an 88 turbo supra with 180,000 miles. the head gasket was replaced and the engine was rebuilt 20k miles ago and the car runs just fine..but lately I noticed smoke coming from the exhaust manifold as soon as i turn the engine off..I think it might just be a bad gasket but I'm not sure..any ideas??? thx!

Bill UK 06-29-2009 06:47 PM

Good news! It’s probably the O-ring in the cam-positing sensor needs replacing; check the front of exhaust manifold heat shield for any burnt oil residue.

http://i17.photobucket.com/albums/b5...f/CPSImage.jpg

http://i17.photobucket.com/albums/b56/cirgriff/CPS.jpg

7mlove88 07-13-2009 09:01 PM

I just checked that out and the O-ring on the CPS is not damaged and looks fine..but the plastic cover of the CPS and the plastic gasket within is cracked and completely destroyed...so despite the 0-ring retaining the oil within the sensor could that plastic cover & gasket be the problem?

Beals 07-14-2009 03:01 AM

Quote:

Originally Posted by 7mlove88 (Post 71240)
I just checked that out and the O-ring on the CPS is not damaged and looks fine..but the plastic cover of the CPS and the plastic gasket within is cracked and completely destroyed...so despite the 0-ring retaining the oil within the sensor could that plastic cover & gasket be the problem?

yeah you probably have to replace the gasket. And check the hoses if theirs any split it'll need replacing, I've had to replace numerous ones.

7mlove88 07-15-2009 01:20 AM

So i replaced the cover and the gasket and when I replaced everything the car would not start..turns out I forgot to mark the position of the CPS..would it be alright to just rea-align the holes from the Dowel pin?

Jimmy224 07-26-2009 09:20 PM

Quote:

Originally Posted by Bill UK (Post 70868)
Good news! It’s probably the O-ring in the cam-positing sensor needs replacing; check the front of exhaust manifold heat shield for any burnt oil residue.

http://i17.photobucket.com/albums/b5...f/CPSImage.jpg

http://i17.photobucket.com/albums/b56/cirgriff/CPS.jpg

Another nice information i think you came from automobile industry am i right????


All times are GMT. The time now is 03:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87