2 questions

suprabahamut · 09-26-2008, 06:01 PM

1The heat does not work right now at the time. I think the line is clogged up with radiator repair chemicals. What is the best way to diagnosis if it is the heater lines or another problem, and what is the best way to unclog the lines.

2 For the time being is there any thing good to use, until I get time to fix the problem the keep the windshield clear. I was wanting to know if rain x will keep the windshield clear if I put it on the inside or the windshield? I also thought chalk or something that absorbs moisture. Does anyone know something that could help clear the windshield? I don't have a lot of time now I work too much and the time I have off it is always raining so I thought I would ask, if there is any thing to help clear the windshield.

Busted Knuckles · 09-27-2008, 01:55 AM

Have you determined the heater valve works? Check this post: http://www.toyota-supra.info/forums/...r-problem.html. It worked for me.

suprabahamut · 09-27-2008, 02:53 PM

Thanks I will do the test.

suprabahamut · 10-19-2008, 08:55 PM

How do you by pass the system? Do you put the hard line to the valve or another way? Right now I have the hard line off because it has a small crack in it. Will it set any codes? What does the hard line go to?

Busted Knuckles · 10-20-2008, 03:12 AM

I just got rid of the hard line, and used a new rubber vacuum hose to go from the 'tee' at the cruise control module to the valve, bypassing the electro-vacuum switch. Once the car starts, you can see the vacuum open the valve.

09-26-2008, 06:01 PM	#1
suprabahamut 3" Exhaust Join Date: May 2007 Location: greensboro Posts: 242	2 questions 1The heat does not work right now at the time. I think the line is clogged up with radiator repair chemicals. What is the best way to diagnosis if it is the heater lines or another problem, and what is the best way to unclog the lines. 2 For the time being is there any thing good to use, until I get time to fix the problem the keep the windshield clear. I was wanting to know if rain x will keep the windshield clear if I put it on the inside or the windshield? I also thought chalk or something that absorbs moisture. Does anyone know something that could help clear the windshield? I don't have a lot of time now I work too much and the time I have off it is always raining so I thought I would ask, if there is any thing to help clear the windshield.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
a few questions about the mkIV supra :D:D	bad.boy	MKIV Supra	4	09-17-2008 01:27 PM
Buying a Supra, I have some questions.	Ungoliant	MKIII Supra	7	12-23-2006 05:17 AM
Need your gus help- a few questions	ravenmaster	MKIII Supra	10	10-21-2006 09:59 PM
new here, few questions	SoooopRa!	MKIII Supra	6	08-29-2006 11:25 AM
newbie questions	erik	MKIII Supra	4	01-10-2006 11:37 AM

09-27-2008, 01:55 AM	#2
Busted Knuckles 12psi boost Join Date: Dec 2007 Location: Atlanta Posts: 300	Have you determined the heater valve works? Check this post: http://www.toyota-supra.info/forums/...r-problem.html. It worked for me.

09-27-2008, 02:53 PM	#3
suprabahamut 3" Exhaust Join Date: May 2007 Location: greensboro Posts: 242	Thanks I will do the test.

10-19-2008, 08:55 PM	#4
suprabahamut 3" Exhaust Join Date: May 2007 Location: greensboro Posts: 242	How do you by pass the system? Do you put the hard line to the valve or another way? Right now I have the hard line off because it has a small crack in it. Will it set any codes? What does the hard line go to?

10-20-2008, 03:12 AM	#5
Busted Knuckles 12psi boost Join Date: Dec 2007 Location: Atlanta Posts: 300	I just got rid of the hard line, and used a new rubber vacuum hose to go from the 'tee' at the cruise control module to the valve, bypassing the electro-vacuum switch. Once the car starts, you can see the vacuum open the valve.