help

supraboy8809 · 05-01-2005, 12:58 AM

i have a 2jz motor that has a knock in it i need info on what the problem could be.
where can i find parts to fix it?

KingDiamond · 05-01-2005, 02:15 AM

Well in realistic sense if you need to save money cause you don't have much to spare, i could see just fixing the problem in the engine. but if you have some money to spend and some time (lets say its not your everyday driver) then i would say rebuild the whole engine. www.whifbitz.co.uk has engine parts. you can also do a search over the internet for different part dealers. other option is they have these engines for bid on ebay with low mileage on them.

suprra_girl · 05-18-2005, 01:40 PM

if ur engine is knocking please don't drive it as it will create a whole lotta damage

you will need to replace your bearings and get your rods, crank, caps all measured to make sure they're within spec... you may be up for a new crank depending on how bad the knocking is and new mains and rod bearings... your reconditioner should be able to tell you what size you need

so basic parts off the top of my head

head gasket
rod bearings
main bearings
rings
crank (maybe)
rod on suspect cylinder (maybe)

and make sure in future you have oil in the engine

05-18-2005, 01:40 PM	#3
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	if ur engine is knocking please don't drive it as it will create a whole lotta damage you will need to replace your bearings and get your rods, crank, caps all measured to make sure they're within spec... you may be up for a new crank depending on how bad the knocking is and new mains and rod bearings... your reconditioner should be able to tell you what size you need so basic parts off the top of my head head gasket rod bearings main bearings rings crank (maybe) rod on suspect cylinder (maybe) and make sure in future you have oil in the engine __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

05-01-2005, 12:58 AM	#1
supraboy8809 Intake Join Date: May 2005 Posts: 37	i have a 2jz motor that has a knock in it i need info on what the problem could be. where can i find parts to fix it?

05-01-2005, 02:15 AM	#2
KingDiamond 12psi boost Join Date: Apr 2005 Location: West Milford, NJ Posts: 357	Well in realistic sense if you need to save money cause you don't have much to spare, i could see just fixing the problem in the engine. but if you have some money to spend and some time (lets say its not your everyday driver) then i would say rebuild the whole engine. www.whifbitz.co.uk has engine parts. you can also do a search over the internet for different part dealers. other option is they have these engines for bid on ebay with low mileage on them.