maneul conversion ?s

tone loc · 12-28-2006, 10:15 PM

never did the pedal but i think there is a write up on supra forums http://supraforums.com/forum/index.php

i didnt really know what i was doin and got stuck on trying to get the starter off and then decided to wait till i get my engine as well so i can do it all at once.

Jeff_5_7 · 12-29-2006, 12:16 AM

i pulled my auto trans today it took me the most time to get the starter out like 45min buy i got the transmission out it took 2hrs and 10min pretty goodi think but my 5spd is going in tommorow

tone loc · 12-29-2006, 01:45 AM

tight post some pics

Jeff_5_7 · 12-30-2006, 03:32 PM

ok so i git my transmission i yesterday it works good but no pics sorry my lcutch squeaks when u push it in and let it out and the pedal fells really soft sometimes it fells like the cltuch isnot disengaing all the way my dad says it is prob the slave cylinder that it is leaking

tone loc · 12-30-2006, 08:13 PM

that or you didnt put the realse hub on right

Jeff_5_7 · 12-30-2006, 09:34 PM

what is the relesase hub

tone loc · 12-31-2006, 06:21 AM

the part that slidesonto the tranny and hold the clucth in place(inside the bell housing)

the part that the fork connects to. try every thing else before you have to take out the tranny cause that would be a bitch or look through the inspection holes in the bell housing.

http://www.cygnusx1.net/Supra/Librar...re=3101&Page=2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starting problem - Gas conversion ???	eggybread	MKIII Supra	9	12-11-2008 01:48 PM
7MGTE-7MGTEU conversion guide?	ravenmaster	MKIII Supra	1	02-17-2008 01:17 AM
Flip headlight conversion?!?!	dannydavi	MKIII Supra	3	03-18-2007 12:25 PM
Conversion or no conversion??	91 Supra	MKIII Supra	1	06-17-2006 03:39 PM
celica supra engin conversion	supramadness	MKII Supra	3	04-10-2006 12:00 AM

12-28-2006, 10:15 PM	#1
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	never did the pedal but i think there is a write up on supra forums http://supraforums.com/forum/index.php i didnt really know what i was doin and got stuck on trying to get the starter off and then decided to wait till i get my engine as well so i can do it all at once.

12-29-2006, 12:16 AM	#2
Jeff_5_7 3" Exhaust Join Date: Sep 2006 Location: Texas Posts: 109	i pulled my auto trans today it took me the most time to get the starter out like 45min buy i got the transmission out it took 2hrs and 10min pretty goodi think but my 5spd is going in tommorow

12-29-2006, 01:45 AM	#3
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	tight post some pics

12-30-2006, 03:32 PM	#4
Jeff_5_7 3" Exhaust Join Date: Sep 2006 Location: Texas Posts: 109	ok so i git my transmission i yesterday it works good but no pics sorry my lcutch squeaks when u push it in and let it out and the pedal fells really soft sometimes it fells like the cltuch isnot disengaing all the way my dad says it is prob the slave cylinder that it is leaking

12-30-2006, 08:13 PM	#5
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	that or you didnt put the realse hub on right

12-30-2006, 09:34 PM	#6
Jeff_5_7 3" Exhaust Join Date: Sep 2006 Location: Texas Posts: 109	what is the relesase hub

12-31-2006, 06:21 AM	#7
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	the part that slidesonto the tranny and hold the clucth in place(inside the bell housing) the part that the fork connects to. try every thing else before you have to take out the tranny cause that would be a bitch or look through the inspection holes in the bell housing. http://www.cygnusx1.net/Supra/Librar...re=3101&Page=2