intake

tellfromchico,ca · 11-15-2006, 04:10 AM

make sure u unbolt the egr valve its next to the firewall its kind of tricky a 12mm short socket with a 6inch extension should do the trick. theres two nuts top and bottom.

Quote:

Originally Posted by jeepkaiser65

Yeah raven, sorry about that. I meen the throttle body. I have got the chamber seperated from the peice that connects to the head about 1/16", But something is holding it back. But now that yall brought it up Im looking at re-routing the air intake. Id like too see some pics of what ppl have done.

jeepkaiser65 · 11-15-2006, 07:30 AM

Thanx yall, After I edited the post earlier I went out and felt around, sure enough there was a bolt on the bottom side closest to the firewall. When I pulled it out I found that a small hose and been broken bout it has like an inch disk kinda thing. I couldnt find anything about it in the book. Ill try to post a pic later. Will a gasket set from the local parts store be good? Or do yall recomend sumpin else? Is there an upgrades to the sytem that I can do right now. Im going to port them out, but I was wondering If there was a diffrent t-body, or intake? For ex. my buddy has an 87 300z. He removed his stock intake, t-body, and dist. and replaced with pathfinder items, which added alot of power. I was thinking about fabing an aluminum intake.

jfunez · 11-15-2006, 04:29 PM

thats a filter ,the disk looking thing you are talking about, it just hangs there,nothing to hook up to.

as far as your buddys 300, it probably added low end torque,thats what the pathfinders are great with but as horsepower, he probably lost a few ponies on the conversion.

jeepkaiser65 · 11-15-2006, 05:09 PM

I gotcha, well heres a couple of pics. I painted the shock towers, thermo housing, and radiator supports. I have the valve covers in the oven right now heating up getting prepped to paint.

jfunez · 11-16-2006, 04:03 AM

cool ..we like pictures...lots of them...lol

11-15-2006, 07:30 AM	#2
jeepkaiser65 3" Exhaust Join Date: Sep 2006 Location: san antonio Tx Posts: 68	Thanx yall, After I edited the post earlier I went out and felt around, sure enough there was a bolt on the bottom side closest to the firewall. When I pulled it out I found that a small hose and been broken bout it has like an inch disk kinda thing. I couldnt find anything about it in the book. Ill try to post a pic later. Will a gasket set from the local parts store be good? Or do yall recomend sumpin else? Is there an upgrades to the sytem that I can do right now. Im going to port them out, but I was wondering If there was a diffrent t-body, or intake? For ex. my buddy has an 87 300z. He removed his stock intake, t-body, and dist. and replaced with pathfinder items, which added alot of power. I was thinking about fabing an aluminum intake. __________________ Id rather die on my feet then live on my knees

11-15-2006, 05:09 PM	#4
jeepkaiser65 3" Exhaust Join Date: Sep 2006 Location: san antonio Tx Posts: 68	I gotcha, well heres a couple of pics. I painted the shock towers, thermo housing, and radiator supports. I have the valve covers in the oven right now heating up getting prepped to paint. Attached Thumbnails __________________ Id rather die on my feet then live on my knees

11-16-2006, 04:03 AM	#5
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	cool ..we like pictures...lots of them...lol Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake Question	EvilDragun	MKIII Supra	18	04-15-2008 04:05 AM
Cleaning Intake & Injectors	mrnickleye	Supra FAQ	6	03-23-2007 04:26 AM
5mge intake manifold upgrade	Allen Crump	Non-Generation Specific Questions	1	11-02-2006 01:53 AM
intake manifold has coolant what did i do wrong?	91toy supra	MKIII Supra	6	09-16-2006 02:46 PM
custom intake manifold	j3pz	MKIII Supra	8	12-07-2005 06:23 PM

11-15-2006, 04:29 PM	#3
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	thats a filter ,the disk looking thing you are talking about, it just hangs there,nothing to hook up to. as far as your buddys 300, it probably added low end torque,thats what the pathfinders are great with but as horsepower, he probably lost a few ponies on the conversion.