Audio/Firewall questions.

tellfromchico,ca · 11-16-2006, 06:15 AM

you can also feed it through with the speedometer cable just have to poke a hole through the boot

Spudboy · 11-16-2006, 02:21 PM

Quote:

Originally Posted by tellfromchico,ca

you can also feed it through with the speedometer cable just have to poke a hole through the boot

The speedo cable hole/boot/gromet was what I was going to suggest. The whole itself is plenty big for more cable. You may be able to squeeze your power cable along side the speedo cable current hole in the boot/gromet. If you can avoid taking that boot/gromet out do it...real pain in the butt to get back in properly. I would also feed your power wire (tape about a 3 inch stiff something to poke through)...feed from the outside (engine bay) in...then contort your body like some yoga dude under the dash and pedals, find it and pull. Good luck.

XtreeX · 11-16-2006, 04:14 PM

I had to run an 8 Gauge and a 4 Gauge so I ended up just picking up a metal drill bit and lettin it ride! I can't remember now cus this thread is actually kinda old, but I believe it was right under brake booster (or right around there)

V1P3R · 03-21-2007, 05:01 PM

Thanks for the help guys, Im just having the problem of not knowing where exactly to run the cable through from the engine bay? the thing is the cable is already run from the back of my car, so it would be going OUT through TO the engine bay, Anyone have any pictures or a REALLY detailed description? GREATLY appreciated!!!

burton51m · 03-21-2007, 08:28 PM

This is where i drilled. You can see where it came out in the engine bay. It's 4 gauge wire going from my battery to my trunk.

j3pz · 03-21-2007, 09:56 PM

thats for an automatic, right? goes through the whole where the clutch pedal/ master cylinder would be. i had a friend install mine, drilled a hole where there was nothing on both sides, and put in a gromet. i dont have a pic, you just dont to get in there look and feel around

V1P3R · 03-21-2007, 10:52 PM

Quote:

Originally Posted by burton51m

http://i8.photobucket.com/albums/a8/...g?t=1174508756

http://i8.photobucket.com/albums/a8/...g?t=1174508784

This is where i drilled. You can see where it came out in the engine bay. It's 4 gauge wire going from my battery to my trunk.

Hey thanks man, but when I just checked mine is set up differently being a 1989, that top left corner of the engine bay doesnt look like yours

Im not too great with cars, there is a resavoir where you drilled your whole through, im guessing clutch fluid since mine is standard transmission?

I cant seem to find ANY holes in the firewell or any space ANYWHERE to even attempt a hole.

This is killing me, I definitely dont want to drill in the wrong spot but I cant even find a spot TO drill!

burton51m · 03-22-2007, 02:40 AM

Quote:

Originally Posted by V1P3R

Hey thanks man, but when I just checked mine is set up differently being a 1989, that top left corner of the engine bay doesnt look like yours

I drilled mine in the top right if you were standing in front of the car as the viewpoint. It shouldnt be that different.

supramacist · 04-10-2007, 05:45 AM

You could take the scenic route and go through where all of the ac components go through as well. If you were so inclined.

j3pz · 04-10-2007, 06:51 PM

ill try to, i get another light also instead of relying on the camera's flash

03-21-2007, 08:28 PM	#5
burton51m Lexus & 550's Join Date: Feb 2006 Location: Canton, OH Posts: 536	This is where i drilled. You can see where it came out in the engine bay. It's 4 gauge wire going from my battery to my trunk. __________________

03-21-2007, 09:56 PM	#6
j3pz 500whp yet? Join Date: Nov 2005 Location: Mechanicsville, MD, US of A, 20659 Posts: 1,060	thats for an automatic, right? goes through the whole where the clutch pedal/ master cylinder would be. i had a friend install mine, drilled a hole where there was nothing on both sides, and put in a gromet. i dont have a pic, you just dont to get in there look and feel around __________________ 88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat

04-10-2007, 06:51 PM	#10
j3pz 500whp yet? Join Date: Nov 2005 Location: Mechanicsville, MD, US of A, 20659 Posts: 1,060	ill try to, i get another light also instead of relying on the camera's flash __________________ 88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
a few questions about the mkIV supra :D:D	bad.boy	MKIV Supra	4	09-17-2008 01:27 PM
Buying a Supra, I have some questions.	Ungoliant	MKIII Supra	7	12-23-2006 05:17 AM
Need your gus help- a few questions	ravenmaster	MKIII Supra	10	10-21-2006 09:59 PM
new here, few questions	SoooopRa!	MKIII Supra	6	08-29-2006 11:25 AM
newbie questions	erik	MKIII Supra	4	01-10-2006 11:37 AM

11-16-2006, 06:15 AM	#1
tellfromchico,ca Stock Join Date: Oct 2006 Location: chico,ca Posts: 28	you can also feed it through with the speedometer cable just have to poke a hole through the boot

11-16-2006, 04:14 PM	#3
XtreeX 3" Exhaust Join Date: Feb 2006 Location: Rockford, IL Posts: 92	I had to run an 8 Gauge and a 4 Gauge so I ended up just picking up a metal drill bit and lettin it ride! I can't remember now cus this thread is actually kinda old, but I believe it was right under brake booster (or right around there)

03-21-2007, 05:01 PM	#4
V1P3R Intake Join Date: Mar 2006 Location: CT Posts: 40	Thanks for the help guys, Im just having the problem of not knowing where exactly to run the cable through from the engine bay? the thing is the cable is already run from the back of my car, so it would be going OUT through TO the engine bay, Anyone have any pictures or a REALLY detailed description? GREATLY appreciated!!!

04-10-2007, 05:45 AM	#9
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	You could take the scenic route and go through where all of the ac components go through as well. If you were so inclined.