Audio/Firewall questions.

Supra2NR · 11-16-2006, 03:15 AM

do it close to the clutch's master cylinder
there's enuff space there to put wires thru for ur amp

what gauge wires are u planning to use

damdog05 · 11-16-2006, 03:48 AM

i put my power wire through a hole already in the firewall near near the master cylinder. inside it comes in back above the pedals. idk if everyone has that hole or if it was made by a previous owner of my car.

tellfromchico,ca · 11-16-2006, 06:15 AM

you can also feed it through with the speedometer cable just have to poke a hole through the boot

Spudboy · 11-16-2006, 02:21 PM

Quote:

Originally Posted by tellfromchico,ca

you can also feed it through with the speedometer cable just have to poke a hole through the boot

The speedo cable hole/boot/gromet was what I was going to suggest. The whole itself is plenty big for more cable. You may be able to squeeze your power cable along side the speedo cable current hole in the boot/gromet. If you can avoid taking that boot/gromet out do it...real pain in the butt to get back in properly. I would also feed your power wire (tape about a 3 inch stiff something to poke through)...feed from the outside (engine bay) in...then contort your body like some yoga dude under the dash and pedals, find it and pull. Good luck.

XtreeX · 11-16-2006, 04:14 PM

I had to run an 8 Gauge and a 4 Gauge so I ended up just picking up a metal drill bit and lettin it ride! I can't remember now cus this thread is actually kinda old, but I believe it was right under brake booster (or right around there)

V1P3R · 03-21-2007, 05:01 PM

Thanks for the help guys, Im just having the problem of not knowing where exactly to run the cable through from the engine bay? the thing is the cable is already run from the back of my car, so it would be going OUT through TO the engine bay, Anyone have any pictures or a REALLY detailed description? GREATLY appreciated!!!

burton51m · 03-21-2007, 08:28 PM

This is where i drilled. You can see where it came out in the engine bay. It's 4 gauge wire going from my battery to my trunk.

11-16-2006, 03:15 AM	#1
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	do it close to the clutch's master cylinder there's enuff space there to put wires thru for ur amp what gauge wires are u planning to use __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

11-16-2006, 03:48 AM	#2
damdog05 12psi boost Join Date: Apr 2006 Location: Georgia Posts: 250	i put my power wire through a hole already in the firewall near near the master cylinder. inside it comes in back above the pedals. idk if everyone has that hole or if it was made by a previous owner of my car. __________________ My cars: 85 Trans Am- Ehhh- Gone 83 Rx7- Much Better- Gone 86.5 Supra- Love- Not Gone

03-21-2007, 08:28 PM	#7
burton51m Lexus & 550's Join Date: Feb 2006 Location: Canton, OH Posts: 536	This is where i drilled. You can see where it came out in the engine bay. It's 4 gauge wire going from my battery to my trunk. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
a few questions about the mkIV supra :D:D	bad.boy	MKIV Supra	4	09-17-2008 01:27 PM
Buying a Supra, I have some questions.	Ungoliant	MKIII Supra	7	12-23-2006 05:17 AM
Need your gus help- a few questions	ravenmaster	MKIII Supra	10	10-21-2006 09:59 PM
new here, few questions	SoooopRa!	MKIII Supra	6	08-29-2006 11:25 AM
newbie questions	erik	MKIII Supra	4	01-10-2006 11:37 AM

11-16-2006, 06:15 AM	#3
tellfromchico,ca Stock Join Date: Oct 2006 Location: chico,ca Posts: 28	you can also feed it through with the speedometer cable just have to poke a hole through the boot

11-16-2006, 04:14 PM	#5
XtreeX 3" Exhaust Join Date: Feb 2006 Location: Rockford, IL Posts: 92	I had to run an 8 Gauge and a 4 Gauge so I ended up just picking up a metal drill bit and lettin it ride! I can't remember now cus this thread is actually kinda old, but I believe it was right under brake booster (or right around there)

03-21-2007, 05:01 PM	#6
V1P3R Intake Join Date: Mar 2006 Location: CT Posts: 40	Thanks for the help guys, Im just having the problem of not knowing where exactly to run the cable through from the engine bay? the thing is the cable is already run from the back of my car, so it would be going OUT through TO the engine bay, Anyone have any pictures or a REALLY detailed description? GREATLY appreciated!!!