Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra

Reply
 
Thread Tools Display Modes
Old 09-30-2006, 09:12 PM   #1
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default where did i go wrong

ok i have a HKS BOV SSQV, it came with a straight pipe with the flange welded on it, i have this flange put onto the IC pipes up by where the Filterbox is then i blocked off the pipe comeing from the 3000 pipe to the air filter hose with a soild metal cylinder, bought a longer hose for the vacume line and ran is from the stock location of what the bypass valve was hooked up to and ran it to the HKS bov. now when im driving it is cutting out like crazy bogging? fuel cut? boost leak somewhere?

if it may be a boost leak where would be some prone spots to look, and also i would like to add that i am venting to the atmosphere and not useing a HKS recirculation kit if anyone needs a picture please ask i will start taking them
west_side_supra is offline   Reply With Quote
Old 09-30-2006, 09:34 PM   #2
justin1642
3" Exhaust
 
justin1642's Avatar
 
Join Date: Mar 2006
Location: Michigan
Posts: 213
justin1642 is on a distinguished road
Default

leave the stock bov hooked up and have the hks one hooked up separately. if you need to have a 3 prong vacum thing to let you hook two vacum lines to the stock location. i plugged up my bov one time and it ran like shit and wouldn't go past 40 mph. so i would reccomend not plugging it up for some reason it screws everything up.
__________________

justin1642 is offline   Reply With Quote
Old 09-30-2006, 09:43 PM   #3
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default pictures

well ill post some pics anyways







PIC 1: just an overall shot of the setup
PIC 2: the pipe im useing to block off the pipes
PIC 3: i poped open my hood yesterday and this was smokeing, the little rubber houseing AHHH THE PAIN

so where am i wrong on this
west_side_supra is offline   Reply With Quote
Old 09-30-2006, 09:44 PM   #4
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

justin i did have it hooked up like that and it was still running the same theres something wrong
west_side_supra is offline   Reply With Quote
Old 09-30-2006, 10:20 PM   #5
suprra_girl
7M POWAH! ;)
 
suprra_girl's Avatar
 
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
suprra_girl has a spectacular aura aboutsuprra_girl has a spectacular aura about
Default

also block the 3000 pipe and intake pipe separately do not join them

we have that same bov and flange pipe on another car here and the bov is loose which will cause a boost leak, make sure it is not loose "at all" as this will cause cutting

have you done a diagnostic?
you do realise that a diagnostic will tell you what is wrong with your car, it is an extremely useful tool that toyota decided to put in our cars
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me

Pics of my build.

"Good girls are just bad girls that don't get caught"

Do a diagnostic first!

Last edited by suprra_girl; 09-30-2006 at 10:23 PM.
suprra_girl is offline   Reply With Quote
Old 09-30-2006, 11:33 PM   #6
marc
12psi boost
 
Join Date: Jun 2006
Location: salem mass
Posts: 329
marc is on a distinguished road
Default

when you hooked up that bov y did u block off all those pipes?
__________________

nothing but the best
-mods- so far
K&N intake fipk
3" megan downpipe
3"turbo elbow
4 washers on the wastegate
highflow cat
short shifter
89+ front bumper, pic soon to come
many more upgrades soon
marc is offline   Reply With Quote
Old 10-01-2006, 10:14 AM   #7
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Unhappy

well i was told at my local performance shop to block off those pipes, im not shur really what they do, but just a good guess is that the 3000 pipe blows air while the other one sucks, i dont see why a diagnostics would be in hand considering there is no check engine light on at all, will it still work even though the light is not on?

its really starting to get worse the exhaust is starting to smell bad to the point of where it is burning my nose when you rev it

errr this is really starting to bug me now, mmm suppra how would you say to seal that loose BOV, i mean i could like maby silicone it or something cause im not planning on driving it anymore till i get this issue fixed. and is this bov an issue since im only running the stock amout of boost im reading maby 7-8psi right now its reading about 3-4psi and then it starts to spudder like crazy

p.s. i also noticed some oil spots on my engine cover dont know what type of oil it is, but i did check my engine oil and it was reading almost nothing and just had it done at my mobile 1 about 1 month ago. so im feeling either its leaking or burning
AHHH i cant have this car die yet.
west_side_supra is offline   Reply With Quote
Old 10-01-2006, 10:56 AM   #8
suprra_girl
7M POWAH! ;)
 
suprra_girl's Avatar
 
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
suprra_girl has a spectacular aura aboutsuprra_girl has a spectacular aura about
Default

get some oil in there asap altho it may be too late

you will need to get a thicker o-ring if the bov is loose
just see if you can wiggle it, if so.. it's loose therefore buy a thicker o-ring

yes diagnosis does not always throw a check engine light... you may still have codes stored

most importantly.. block those pipes how i told you, not how you have them
i shall explain

air gets sucked in through the turbo, to the intercooler up to the 3000 pipe meanwhile the turbo is sucking the air that is in the 3000 pipe back through to the turbo due to you having it joined
i.e no air is basically getting to the engine, it is overfueling like a mofo and can't run properly

maybe my drawing will help some
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me

Pics of my build.

"Good girls are just bad girls that don't get caught"

Do a diagnostic first!
suprra_girl is offline   Reply With Quote
Old 10-01-2006, 11:04 AM   #9
suprra_girl
7M POWAH! ;)
 
suprra_girl's Avatar
 
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
suprra_girl has a spectacular aura aboutsuprra_girl has a spectacular aura about
Default

oh hang on... is that pipe solid? as in no hole in the center?

if so... then do a diagnostic
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me

Pics of my build.

"Good girls are just bad girls that don't get caught"

Do a diagnostic first!
suprra_girl is offline   Reply With Quote
Old 10-01-2006, 04:38 PM   #10
j3pz
500whp yet?
 
Join Date: Nov 2005
Location: Mechanicsville, MD, US of A, 20659
Posts: 1,060
j3pz is on a distinguished road
Default

Quote:
Originally Posted by west_side_supra
i blocked off the pipe comeing from the 3000 pipe to the air filter hose with a soild metal cylinder
solid pipe
__________________
88 N/A w/ 5spd - stock - not running, bhg
87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat
j3pz is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Audio and a lot of other things wrong with car bluemeate MKIII Supra 4 05-18-2010 07:07 PM
Wrong oils everywhere Gunnar MKIII Supra 1 01-08-2008 04:08 PM
My fenders look wrong Kristian_Wraae Non-Generation Specific Questions 14 05-07-2007 03:20 PM
intake manifold has coolant what did i do wrong? 91toy supra MKIII Supra 6 09-16-2006 02:46 PM


All times are GMT. The time now is 02:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87