Blown head gasket ?!?!:(:(:(

tyron · 02-22-2006, 02:03 AM

Quote:

Originally Posted by kewlcoconut

your dad is a mechanic??? then you have no problem! lol. no no its not 1700 for the gasket. you can get like an entire gasket set for your engine for $120. all that other money is labor. replacing the HG is a loooong and tedious job. around 12-15hrs some say. thats why the cost is about 1700. if you can get your dad to do it, you are looking at nothing really haha.

Yea he is a mechanic. I doubt he is going to help me though, if not I will just take it into my school shop and repair it there. Thnk you for everyone who has helped me, I almost fainted when I saw the cost of the repair. So if you want to replace the gasket with a metal one....you have to get that block milled right? Is it expensive? thnx again and sry for all the newb questions.

mrnickleye · 02-22-2006, 02:19 AM

No need to do a metal gasket unless. 1) its a turbo. 2) you are gonna put some $$ into getting the horse power up to 300 or more.

To mill the block means to remove it from the car, and strip it down. That means you are gonna rebuild the whole motor.

Also see the thread in the FAQs section on Head gaskets.

tyron · 02-22-2006, 03:29 AM

Quote:

Originally Posted by mrnickleye

No need to do a metal gasket unless. 1) its a turbo. 2) you are gonna put some $$ into getting the horse power up to 300 or more.

To mill the block means to remove it from the car, and strip it down. That means you are gonna rebuild the whole motor.

Also see the thread in the FAQs section on Head gaskets.

Thnx again. I'll probaly just end up throwing in an 7M-GTE, are they reliable and bullet proof once the heads been built up?

mrnickleye · 02-22-2006, 04:17 AM

^^^They seem to be. Just use care when your doing things. If something looks a bit wrong, get an experienced mechanic's opinion.

tyron · 02-23-2006, 03:18 AM

Alright guys I've jus got home from checking the car out and I think I'm going to get it. It has some rust (common on a 19 year old car)on the front and rear fenders. I do know somebody who knows an auto body shop so hopefully I can get it done for cheap. The engine is fine...but its the tranny im worried about. It has 250-275 on it and I'm thinking of replacing it. I jus have another stupid question. Does anyone know how much they regulary go for? thnx again guys. This is helping me out alot.

thnx

mrnickleye · 02-23-2006, 04:10 AM

Here it costs about $1500 for an automatic to get rebuilt. About $1000 for 5 speed.

tyron · 02-23-2006, 01:17 PM

Quote:

Originally Posted by mrnickleye

Here it costs about $1500 for an automatic to get rebuilt. About $1000 for 5 speed.

What about getting one used? How much are thoes?

02-22-2006, 02:19 AM	#2
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	No need to do a metal gasket unless. 1) its a turbo. 2) you are gonna put some $$ into getting the horse power up to 300 or more. To mill the block means to remove it from the car, and strip it down. That means you are gonna rebuild the whole motor. Also see the thread in the FAQs section on Head gaskets. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

02-22-2006, 04:17 AM	#4
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	^^^They seem to be. Just use care when your doing things. If something looks a bit wrong, get an experienced mechanic's opinion. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

02-23-2006, 03:18 AM	#5
tyron Stock Join Date: Feb 2006 Posts: 16	Alright guys I've jus got home from checking the car out and I think I'm going to get it. It has some rust (common on a 19 year old car)on the front and rear fenders. I do know somebody who knows an auto body shop so hopefully I can get it done for cheap. The engine is fine...but its the tranny im worried about. It has 250-275 on it and I'm thinking of replacing it. I jus have another stupid question. Does anyone know how much they regulary go for? thnx again guys. This is helping me out alot. thnx Last edited by tyron; 03-17-2006 at 05:05 PM.

02-23-2006, 04:10 AM	#6
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	rebuild tranny Here it costs about $1500 for an automatic to get rebuilt. About $1000 for 5 speed. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown Head Gasket Symptoms!	Dejvid1785	MKIII FAQ	76	04-24-2011 07:59 PM
Blown Head Gasket Snake Oil	unkymurch	Non-Generation Specific Questions	21	08-06-2010 02:11 AM
1989 Supra blown head gasket	rayk5799	Non-Generation Specific Questions	6	05-18-2009 10:51 AM
Update: Blown Head Gasket Snake Oil - 8 months later	unkymurch	Non-Generation Specific Questions	3	12-17-2008 09:35 PM