Head and Block Machined??

[TONY!]

Originally Posted by Idaho

Hi, I apologiye for mz english, but can you specify Permatex Brake Quiet " ??


I don't know what to udersatnd uder this term..

thanks..

Well the "Permatex Brake Quite" is used to seal up imperfections to decrease the likelyhood of getting a BHG. If you just can't get your block machined, but have determined that the block is straight and not warped without too big of surface imperfections, this may be the way to go.

You would buy the spray can type (it also comes in a tube, but that is not what you want) and put on 2 spray coats on each side.
Spray the gasket while it is hanging so that you can spray both sides evenly that way.
Let dry for about 15 minutes and then start assembling things.
The following is a picture of a can:


I also took a picture of a MHG that had this sealant on it (in the attached pic).
It is not my build up, but is my friend's (shaeff's).
He won't mind me using that pic, since I was the one that took it in the first place. heheh

EDIT:
Didn't know you had already replied, kewlcoconut.
You did it while I was making this post. heheh

[mrnickleye]

kewlcoconut said......."well, there is a company called "Permatex", and they make a product called Brake Quiet. you spray it on your brakes to quiet them".

He meant on the back side of the brake pads, before installing them. DO NOT just spray this stuff onto your brakes. (believe me, I've seen it done, and its not a pretty site).

[flight doc89]

Originally Posted by mrnickleye

kewlcoconut said......."well, there is a company called "Permatex", and they make a product called Brake Quiet. you spray it on your brakes to quiet them".

He meant on the back side of the brake pads, before installing them. DO NOT just spray this stuff onto your brakes. (believe me, I've seen it done, and its not a pretty site).

Oohhh.....THAT explains it (snicker)

[kewlcoconut]

errrrr sorry, thought i said back of brake pads haha....good thing mrnickleye corrected me there. yes, as he said, DO NOT spray directly on brakes.

[Idaho]

Originally Posted by mrnickleye

kewlcoconut said......."well, there is a company called "Permatex", and they make a product called Brake Quiet. you spray it on your brakes to quiet them".

He meant on the back side of the brake pads, before installing them. DO NOT just spray this stuff onto your brakes. (believe me, I've seen it done, and its not a pretty site).

muhehe - good mention but I hope, that nobody is so dump to spray it onto braking area of brake discs