BHG removal

ddmcse · 01-31-2006, 10:40 PM

studs are better than bolts
but studs require you to pull the engine out
so after the studs are in the head can be put back on
otherwise the head won't be able to fit into the engine bay when studs are in

Bullz_EyE · 02-01-2006, 02:47 PM

From what I've been told, when using studs if you're not pulling the engine, you put all the studs in except for the back two. Set the head, then install the last two studs.

j3pz · 02-01-2006, 06:43 PM

how exactly do you set the studs? do you have them torqued in or sealed or what?

Bullz_EyE · 02-02-2006, 03:37 AM

ARP studs replace the head bolts. They come with an allen wrench I believe. Not sure how tight you set the stud though, or if they require any special lubricant when you install them. When you're ready to install the head they torque down with nuts, and they can be torqued even tighter than bolts.

01-31-2006, 10:40 PM	#1
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	studs are better than bolts but studs require you to pull the engine out so after the studs are in the head can be put back on otherwise the head won't be able to fit into the engine bay when studs are in __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

02-01-2006, 02:47 PM	#2
Bullz_EyE 3" Exhaust Join Date: Oct 2005 Location: San Diego, CA Posts: 238	From what I've been told, when using studs if you're not pulling the engine, you put all the studs in except for the back two. Set the head, then install the last two studs. __________________ Function Over Form - Form Follows Function 88 MkIII Jurbo

02-01-2006, 06:43 PM	#3
j3pz 500whp yet? Join Date: Nov 2005 Location: Mechanicsville, MD, US of A, 20659 Posts: 1,060	quick ? how exactly do you set the studs? do you have them torqued in or sealed or what? __________________ 88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat

02-02-2006, 03:37 AM	#4
Bullz_EyE 3" Exhaust Join Date: Oct 2005 Location: San Diego, CA Posts: 238	ARP studs replace the head bolts. They come with an allen wrench I believe. Not sure how tight you set the stud though, or if they require any special lubricant when you install them. When you're ready to install the head they torque down with nuts, and they can be torqued even tighter than bolts. __________________ Function Over Form - Form Follows Function 88 MkIII Jurbo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine removal	mizuboi	MKIII Supra	11	06-10-2011 06:25 AM
Starter Removal question	OkieRA29	MKIII Supra	13	05-11-2010 12:08 AM
86.5 auto transmission removal HELP!!!	elmer	MKIII Supra	13	04-06-2010 10:41 PM
Fuse Removal + Nice Supra Pic	jdbones	Non-Generation Specific Questions	0	01-28-2008 01:01 AM
Is this true? Fuse removal can change limiter	jdbones	Non-Generation Specific Questions	0	12-30-2007 10:31 AM