Its Alive And Runs Great! - Page 2

kwnate · 01-10-2006, 04:51 AM

get a BIC Downpipe and test pipe. It should bolt up to your stock exhaust. You'll love the quick spool and it shouldn't effect your noise level. It'll cost $375 or so, but it is well worth it imo. You don't need your cat for inspection do you?

GreenChevelleSS · 01-10-2006, 04:55 AM

What inspections? lol...Not in okiehoma

$300+ bucks! If i had that id feel rich! I was looking and saw a Stainless DP on ebay for about $50+$35 s&h. Looked like a good pipe too... I might just pull mine off and have my bro weld up a new pipe in for the first cat.

kwnate · 01-10-2006, 05:11 AM

thats fine, but you'll notice the biggest difference when you swap out the turbo elbow. It is insanely restrictive.

GreenChevelleSS · 01-10-2006, 05:45 AM

Where can I get a cheap better turbo elbow or how hard would it be to mod the stock one?

Bullz_EyE · 01-10-2006, 07:36 AM

I cannot concur 1st hand, but from what I've gathered the turbo elbow is the most effective single exhaust modification without resorting to changing the stock manifold. You'd be hard pressed to find one under $100, even on eBay, but that's where I got mine for $80 something (including shipping).

I know you've probably seen your stock elbow already, but I haven't seen any real good side by side comparisons posted on the net, so here's mine. I haven't installed it yet because I'm having this piece ceramic coated. That's why I can't tell you how it feels.

I wonder why this fat kink was cast into the factory piece? There is nothing around that area that would indicate any type of clearance issue.

If you're looking for an elbow, I believe Suprra_Girl has them available. I'd shoot a PM to her.

GreenChevelleSS · 01-11-2006, 04:29 AM

Alright I found a place that will get rid of my cats cheap and those pics are great thanks for them bulls eye... I think I might get a elbow too if I can find one cheap.

kwnate · 01-11-2006, 02:07 PM

I've also seen modified stock elbows, where they ground that wall out. It's definetly worth it.

01-10-2006, 04:51 AM	#11
kwnate SP58GT Join Date: Jul 2005 Location: USA Posts: 633	get a BIC Downpipe and test pipe. It should bolt up to your stock exhaust. You'll love the quick spool and it shouldn't effect your noise level. It'll cost $375 or so, but it is well worth it imo. You don't need your cat for inspection do you? __________________ Nate

01-10-2006, 04:55 AM	#12
GreenChevelleSS 3" Exhaust Join Date: Oct 2005 Location: okiehoma USA Posts: 70	What inspections? lol...Not in okiehoma $300+ bucks! If i had that id feel rich! I was looking and saw a Stainless DP on ebay for about $50+$35 s&h. Looked like a good pipe too... I might just pull mine off and have my bro weld up a new pipe in for the first cat. __________________ 1990 Toyota Supra Turbo 7M-GTE 1970 Chevrolet Chevelle SS 396 1996 Chevrolet Silverado Z71 www.cardomain.com/id/3115ultima

01-10-2006, 05:11 AM	#13
kwnate SP58GT Join Date: Jul 2005 Location: USA Posts: 633	thats fine, but you'll notice the biggest difference when you swap out the turbo elbow. It is insanely restrictive. __________________ Nate

01-10-2006, 05:45 AM	#14
GreenChevelleSS 3" Exhaust Join Date: Oct 2005 Location: okiehoma USA Posts: 70	Where can I get a cheap better turbo elbow or how hard would it be to mod the stock one? __________________ 1990 Toyota Supra Turbo 7M-GTE 1970 Chevrolet Chevelle SS 396 1996 Chevrolet Silverado Z71 www.cardomain.com/id/3115ultima

01-10-2006, 07:36 AM	#15
Bullz_EyE 3" Exhaust Join Date: Oct 2005 Location: San Diego, CA Posts: 238	I cannot concur 1st hand, but from what I've gathered the turbo elbow is the most effective single exhaust modification without resorting to changing the stock manifold. You'd be hard pressed to find one under $100, even on eBay, but that's where I got mine for $80 something (including shipping). I know you've probably seen your stock elbow already, but I haven't seen any real good side by side comparisons posted on the net, so here's mine. I haven't installed it yet because I'm having this piece ceramic coated. That's why I can't tell you how it feels. I wonder why this fat kink was cast into the factory piece? There is nothing around that area that would indicate any type of clearance issue. If you're looking for an elbow, I believe Suprra_Girl has them available. I'd shoot a PM to her. Last edited by Bullz_EyE; 01-10-2006 at 07:41 AM.

01-11-2006, 04:29 AM	#16
GreenChevelleSS 3" Exhaust Join Date: Oct 2005 Location: okiehoma USA Posts: 70	Alright I found a place that will get rid of my cats cheap and those pics are great thanks for them bulls eye... I think I might get a elbow too if I can find one cheap. __________________ 1990 Toyota Supra Turbo 7M-GTE 1970 Chevrolet Chevelle SS 396 1996 Chevrolet Silverado Z71 www.cardomain.com/id/3115ultima

01-11-2006, 02:07 PM	#17
kwnate SP58GT Join Date: Jul 2005 Location: USA Posts: 633	I've also seen modified stock elbows, where they ground that wall out. It's definetly worth it. __________________ Nate

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Its Alive!!!	Pretaco	MKIII Supra	0	01-18-2008 04:34 PM