06-02-2013, 08:36 PM
|
#2 |
|
12psi boost
Join Date: Dec 2007
Location: Atlanta
Posts: 300
 |
Thanks to cre, I've got the coolant and heater hose exploded diagrams with part numbers (below). I'm getting ready to replace all the rubber lines, since I've now had 3 coolant lines pop leaks in the last year. It looks like the best way to replace both these 90-deg bends is to remove the thermostat housing. The fit is very tight, but removing the housing first looks like it will open up the space. Cut the existing hoses if you need to, then remove the cut hoses once the housing is off. Attach new hoses to the housing, then install the hoses to the pipes on the block as you reinstall the housing with a new gasket.
http://www.cygnusx1.net/Supra/Librar...spx?F=1603&P=1 http://www.cygnusx1.net/Supra/Librar...spx?F=8716&P=1 |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Coolant Hose Diagram | IHateHacks | MKIII Supra | 11 | 07-02-2013 03:08 AM |
| Anyone still have the coolant hose part number diagram? | Busted Knuckles | MKIII Supra | 1 | 04-21-2013 04:56 PM |
| Auto Supra Coolant hose pressure and return leak to oil pan and filter area? | rjSupra | MKIII Supra | 45 | 01-18-2011 12:12 AM |
| Replacing Clutch reservoir Hose and fixing rock plate (plastic one) | Grandavi | MKIII Supra | 2 | 09-29-2008 04:49 AM |
| Replacing Power Steering Hose - need help | xTomKx | MKIII Supra | 15 | 01-15-2008 06:34 AM |
Threaded Mode