Engine pulling help needed

cre · 02-20-2012, 06:16 PM

Put it on a straight edge on lay it on a piece of glass to see how flat it is and hopefully someone will do the same with a known good one for you. I don't have one on hand nor do I have a MKIII here which I could pull one out of at the moment.

icey756 · 02-20-2012, 11:24 PM

well i dont think i need to worry about it. It came off pretty smooth after that fork was off.

icey756 · 02-22-2012, 04:21 PM

can someone point me in the right direction for a complete gasket set? I need gaskets for everything. i mean everything. haha. i see some kits but idk if everything is included and what not.

CanadianBak'inSupra · 02-22-2012, 06:15 PM

toyota has the best quality i would hope.
felpro makes a good set.
ebay you can find lots of cheap sets but quality is questionable.

icey756 · 02-22-2012, 06:50 PM

All the felpro sets i looked at dont include ALL of the gaskets. I need one for my rear timing belt cover as well which i didnt see included

CanadianBak'inSupra · 02-22-2012, 07:45 PM

felpro does not make a full gasket set.
seeing as there is only a few gaskets on the block just buy them seperate (front and rear crank seals) felpro should have another set for in between and behind the timing case/cover. that should cover all of them...

cre · 02-22-2012, 09:56 PM

Fel-Pro at least used to offer a full kit. They still sell everything but it's separated into an upper kit and a lower kit. As much as I hear this I really wish I hadn't given away the Toyota kits I had.... Could've made my money back selling the gaskets individually. :P

Do NOT use a gasket on the oil pan!!! It WILL leak!

02-20-2012, 06:16 PM	#1
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Put it on a straight edge on lay it on a piece of glass to see how flat it is and hopefully someone will do the same with a known good one for you. I don't have one on hand nor do I have a MKIII here which I could pull one out of at the moment. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

02-20-2012, 11:24 PM	#2
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	well i dont think i need to worry about it. It came off pretty smooth after that fork was off. __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

02-22-2012, 04:21 PM	#3
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	can someone point me in the right direction for a complete gasket set? I need gaskets for everything. i mean everything. haha. i see some kits but idk if everything is included and what not. __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

02-22-2012, 06:15 PM	#4
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	toyota has the best quality i would hope. felpro makes a good set. ebay you can find lots of cheap sets but quality is questionable. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

02-22-2012, 06:50 PM	#5
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	All the felpro sets i looked at dont include ALL of the gaskets. I need one for my rear timing belt cover as well which i didnt see included __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

02-22-2012, 07:45 PM	#6
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	felpro does not make a full gasket set. seeing as there is only a few gaskets on the block just buy them seperate (front and rear crank seals) felpro should have another set for in between and behind the timing case/cover. that should cover all of them... __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

02-22-2012, 09:56 PM	#7
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Fel-Pro at least used to offer a full kit. They still sell everything but it's separated into an upper kit and a lower kit. As much as I hear this I really wish I hadn't given away the Toyota kits I had.... Could've made my money back selling the gaskets individually. :P Do NOT use a gasket on the oil pan!!! It WILL leak! __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!: 7MGTE engine block info needed	barton	MKIII Supra	1	05-19-2010 05:54 PM
HELP!: 7MGTE engine block info needed	barton	MKIII Supra	6	04-14-2010 09:28 PM
Well crap! Advice needed with shot engine	finaltable	MKIII Supra	10	03-13-2008 07:35 PM
change oil pump without pulling engine	Jjona5	MKIII Supra	2	02-11-2007 03:29 AM
Pulling Engine and trans	adamh88	MKIII Supra	3	01-15-2007 05:36 PM