Custome Air Box

pandrade · 01-26-2012, 01:21 AM

im thinking fiberglass for the air box and the piping aluminum thats insulated just to make things easier

cre · 01-26-2012, 04:04 AM

I'd skip the attempt at ram-air feeding the turbo... You may have problems with boost-creep.

pandrade · 01-26-2012, 01:28 PM

what do you mean by ram air feeding the turbo? im leavign everything in stock location just building a box around the filter to keep heat out and using a pipe that feeds air into the box using the stock cut away in the frame

cre · 01-26-2012, 04:53 PM

If effectively built it could pressurize the air box the higher the higher your speed.

pandrade · 01-26-2012, 08:01 PM

so what do you recomend just to make the air box and not run a feed line into it from the outside?

cre · 01-26-2012, 11:32 PM

You can put in a feed if you like, just build it so that it's simple to remove if you do suffer problems.

pandrade · 01-27-2012, 02:09 AM

all right sounds good, ill post pics later when i have everything set and done

01-26-2012, 04:04 AM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I'd skip the attempt at ram-air feeding the turbo... You may have problems with boost-creep. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

01-26-2012, 04:53 PM	#4
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	If effectively built it could pressurize the air box the higher the higher your speed. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

01-26-2012, 11:32 PM	#6
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	You can put in a feed if you like, just build it so that it's simple to remove if you do suffer problems. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-26-2012, 01:21 AM	#1
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	im thinking fiberglass for the air box and the piping aluminum thats insulated just to make things easier

01-26-2012, 01:28 PM	#3
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	what do you mean by ram air feeding the turbo? im leavign everything in stock location just building a box around the filter to keep heat out and using a pipe that feeds air into the box using the stock cut away in the frame

01-26-2012, 08:01 PM	#5
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	so what do you recomend just to make the air box and not run a feed line into it from the outside?

01-27-2012, 02:09 AM	#7
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	all right sounds good, ill post pics later when i have everything set and done