ign timing?

El Supracabras · 08-04-2011, 01:41 AM

I'd still look for the pins in the ecu. I wouldn't want you to mess up the engine. What year is the ecu from? We can try and find a diagram. The engine wont show you base timing unless the pins are shorted, otherwise it's just going to show you the corrected timing. Also it would be good to be able to check VF voltage to help with tuning it and if there are any codes stored. You can make your own diagnostic box to do all of this.

turbonicsperformance · 08-04-2011, 02:00 AM

Quote:

Originally Posted by El Supracabras

I'd still look for the pins in the ecu. I wouldn't want you to mess up the engine. What year is the ecu from? We can try and find a diagram. The engine wont show you base timing unless the pins are shorted, otherwise it's just going to show you the corrected timing. Also it would be good to be able to check VF voltage to help with tuning it and if there are any codes stored. You can make your own diagnostic box to do all of this.

I've got a bunch of diagrams I just figured it'd be easier this way than hacking into my wires again i guess i can just put in some t-taps with spade connector ports as long as its not one of the wires i removed completely

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
harmonic balancer came off crank shaft help?	wishiknewmore	MKIII Supra	3	04-15-2011 11:04 AM
Timing Knock or tap	batmmannn	MKIII Supra	5	06-02-2010 03:20 AM
Exhaust vs Timing, something else?	Krem	MKIII Supra	9	03-18-2010 02:39 AM
timing problem with knock	robertsws	MKIII Supra	1	09-04-2009 03:40 PM
Timing question	Kevin	MKIII Supra	3	07-10-2009 07:52 PM

08-04-2011, 01:41 AM	#1
El Supracabras 3" Exhaust Join Date: Feb 2010 Location: Chicago Posts: 240	I'd still look for the pins in the ecu. I wouldn't want you to mess up the engine. What year is the ecu from? We can try and find a diagram. The engine wont show you base timing unless the pins are shorted, otherwise it's just going to show you the corrected timing. Also it would be good to be able to check VF voltage to help with tuning it and if there are any codes stored. You can make your own diagnostic box to do all of this.