Manual transmission, INsTALL(jacking it up)

ochowdero Manual transmission,... 04-18-2011, 11:51 PM

Travis89Turbo I tried doin mine on my 1j... 04-19-2011, 01:56 AM

ochowdero its in my garage, i dont have... 04-19-2011, 07:07 AM

ochowdero i was thinking of just taking... 04-19-2011, 08:06 AM

87hilux7mge id say your easiest bet now... 04-19-2011, 09:22 AM

ochowdero yeah im going to do that..... 04-19-2011, 07:59 PM

Conga1991 I agree with those guys. I... 04-20-2011, 03:12 AM

ochowdero got my tranny in, but i need... 04-21-2011, 07:47 AM

Travis89Turbo Ok here we go..... the speedo... 04-21-2011, 12:28 PM

Conga1991 Do you only have two of the... 04-21-2011, 02:18 PM

ochowdero The bellhousing bolts... 04-21-2011, 07:17 PM

87hilux7mge ok, well id be wary of that... 04-21-2011, 09:36 PM

ochowdero i was told that the auto... 04-21-2011, 09:47 PM

87hilux7mge well the shifter looks to be... 04-21-2011, 10:01 PM

ochowdero looks like im gonna go and... 04-22-2011, 01:03 AM

87hilux7mge bleeding the clutch is fairly... 04-22-2011, 08:32 AM

ochowdero haha i know somebody in here... 04-22-2011, 10:08 AM

btwilson86 The neutral start switch... 04-22-2011, 05:50 PM

btwilson86 Oh, and I don't know if... 04-22-2011, 05:52 PM

CanadianBak\'inSupra good example of why you... 04-22-2011, 10:09 PM

87hilux7mge lol, agreed on the tranny... 04-22-2011, 10:14 PM

CanadianBak\'inSupra 3900 this is the switch... 04-22-2011, 10:20 PM

CanadianBak\'inSupra lol takin out the 7m ait that... 04-22-2011, 10:22 PM

ochowdero wait wait wait, i take that... 04-23-2011, 08:01 AM

ochowdero it was a lot of BS! and three... 04-23-2011, 07:59 AM

btwilson86 If you take the neutral... 04-23-2011, 04:29 PM

ochowdero i get the jumping the wire... 04-23-2011, 11:55 PM

ochowdero can someone help me with a... 04-24-2011, 06:41 AM

ochowdero bump... and the best way to... 04-24-2011, 08:16 AM

ochowdero i would have but i didnt take... 04-23-2011, 10:16 AM

ochowdero can you guys help me?...... 04-25-2011, 07:37 AM

87hilux7mge the help has been posted... 04-25-2011, 08:29 AM

CanadianBak\'inSupra except it needs to be longer,... 04-25-2011, 03:50 PM

87hilux7mge thanks canadian, so with that... 04-26-2011, 02:37 AM

04-22-2011, 10:09 PM	#20
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	good example of why you should bag your bolts with labels... the washers should be for trans mount, to chassis. the safty switch is located on the shifter of your auto, simply just disconnect it from the auto and plug it into your harness, and move it to the park position. i usually just cram it up with the clutch master cylinder. and dam... if you got that tranny on without pulling the engine I AM impressed, because you have just reached a level of patience i will never get. it is probly faster to pull the engine though, renting a cherry picker is not much, probly 30 bucks a day. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

Forum Jump

All times are GMT. The time now is 08:36 PM.