Manual transmission, INsTALL(jacking it up)

ochowdero · 04-18-2011, 11:51 PM

so i guess my old thread is old or no longer aactive...
i need help on jacking up my manual transmission and bolting it on...
what do i do first? ETC.....
please help out..
i need this car up and running by next week, i start college!

Travis89Turbo · 04-19-2011, 01:56 AM

I tried doin mine on my 1j without pulling the motor and....... spent 3hrs getting no where so I spent the next 1.5 hrs pulling the motor then bolting it to the belhousing (after the ailment tool) then 2.5 to swap it back in. All in all. I wish I would of pulled the motor and trans in the first place would have been a hell of a lot easier and faster then messing around trying to do it with motor installed!

ochowdero · 04-19-2011, 07:07 AM

its in my garage, i dont have a cherry picker for the motor or even the knowledge to take the motor out.
i got it jacked up but the exhaust is in my way, and i cant unbolt it becuz its welded on there. any other way i can get it on without pulling the motor, and getting the front peice of the exhaust off? thankks

ochowdero · 04-19-2011, 08:06 AM

i was thinking of just taking off my whole exhaust off, (manifold and front half[first cat]) should i do that or is ther another way?

87hilux7mge · 04-19-2011, 09:22 AM

id say your easiest bet now is to remove the exhaust manifold and the piping at the next soonest point. cant remember how the exhaust routes on mk3's...its been too long since i had mine.

ochowdero · 04-19-2011, 07:59 PM

yeah im going to do that.. and maybe replace my first cat with a newer one

ochowdero · 04-25-2011, 07:37 AM

can you guys help me?......

87hilux7mge · 04-25-2011, 08:29 AM

the help has been posted already. the switch wires that need to be jumped are on the car, part of the wiring harness itself. driveshaft, check the local pick n pull yards, or you may have to pay some coin to have one made. usually 80-100 bux to have one shortened and balanced by a machinist.

CanadianBak'inSupra · 04-25-2011, 03:50 PM

Quote:

Originally Posted by 87hilux7mge

the help has been posted already. the switch wires that need to be jumped are on the car, part of the wiring harness itself. driveshaft, check the local pick n pull yards, or you may have to pay some coin to have one made. usually 80-100 bux to have one shortened and balanced by a machinist.

except it needs to be longer, the automagic, is longer than the w58, so the drive shaft for a auto is shorter. the dshaft for the w58 is longer.

87hilux7mge · 04-26-2011, 02:37 AM

Quote:

Originally Posted by CanadianBak'inSupra

except it needs to be longer, the automagic, is longer than the w58, so the drive shaft for a auto is shorter. the dshaft for the w58 is longer.

thanks canadian, so with that info, it will have to be longer. same case then, go to the pick n pull, and find a long driveshafter from a pickup, preferably a full size pickup, with a diesel and in the 90s if you can find it.

then you can get a nice aluminum shaft thats stronger than stock and lighter, freeing up a couple hp. and it wont rust to hell. plus, most machinist rates are cheaper when dealing with aluminum, at least around here.

my DS for my camaro cost me 95 bux to have shortened, welded and balanced, it was from a 99 f350 superduty, 3.5 inch aluminum. weighed like 6 lbs or so, i cant remember but it was waaaay lighter than the stock steel one.

04-18-2011, 11:51 PM	#1
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	Manual transmission, INsTALL(jacking it up) so i guess my old thread is old or no longer aactive... i need help on jacking up my manual transmission and bolting it on... what do i do first? ETC..... please help out.. i need this car up and running by next week, i start college! __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

04-19-2011, 01:56 AM	#2
Travis89Turbo 12psi boost Join Date: Jul 2010 Location: Utah Posts: 332	I tried doin mine on my 1j without pulling the motor and....... spent 3hrs getting no where so I spent the next 1.5 hrs pulling the motor then bolting it to the belhousing (after the ailment tool) then 2.5 to swap it back in. All in all. I wish I would of pulled the motor and trans in the first place would have been a hell of a lot easier and faster then messing around trying to do it with motor installed! __________________ 1995 Toyota Supra SE 71k miles. Master power T70 stock 2jzge 1989 Toyota Supra. 1jzgte swap 5 speed of course.. Driftmotion 60-1 single turbo kit. Cxracing FMIC. 2jz 550cc injectors... soon to come..... EMS Stinger. BC 264 cams 680cc injectors Spec stage 4 clutch and A LOT of boost!------SOLD 1999 Ford F350 diesel 2004 Jaguar XJR Supercharged If it hasnt broke you haven pushed it hard enough!!

04-19-2011, 07:07 AM	#3
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	its in my garage, i dont have a cherry picker for the motor or even the knowledge to take the motor out. i got it jacked up but the exhaust is in my way, and i cant unbolt it becuz its welded on there. any other way i can get it on without pulling the motor, and getting the front peice of the exhaust off? thankks __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

04-19-2011, 08:06 AM	#4
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	i was thinking of just taking off my whole exhaust off, (manifold and front half[first cat]) should i do that or is ther another way? __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

04-19-2011, 09:22 AM	#5
87hilux7mge walbro fp Join Date: Dec 2010 Location: spokane Posts: 479	id say your easiest bet now is to remove the exhaust manifold and the piping at the next soonest point. cant remember how the exhaust routes on mk3's...its been too long since i had mine. __________________ 87 toyota 4x4 single cab short box pickup, 7MGZE.

04-19-2011, 07:59 PM	#6
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	yeah im going to do that.. and maybe replace my first cat with a newer one __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

04-25-2011, 07:37 AM	#7
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	can you guys help me?...... __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

04-25-2011, 08:29 AM	#8
87hilux7mge walbro fp Join Date: Dec 2010 Location: spokane Posts: 479	the help has been posted already. the switch wires that need to be jumped are on the car, part of the wiring harness itself. driveshaft, check the local pick n pull yards, or you may have to pay some coin to have one made. usually 80-100 bux to have one shortened and balanced by a machinist. __________________ 87 toyota 4x4 single cab short box pickup, 7MGZE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
manual transmission	frostburn	MKIII Supra	9	08-18-2008 05:59 AM
Auto to Manual transmission?	dannydavi	MKIII Supra	19	05-18-2007 05:33 AM